Power adaptation

[york21]

I have a LaserJet1020 printer with 220-240v power that I brought to the US from Europe. It is 50/60 Hz.  Can I use it in the US with an adapter?  If so, what adapter should I use?  

Thanks.

[Betty0610]

@york21

Welcome to the HP Support Community.

Let me know if this helps: Make sure your power source is adequate for the product voltage rating. The voltage rating is on the product label. The product uses either 110-127 Vac or 220-240 Vac and 50/60 Hz. Connect the power cord between the product and a grounded AC outlet. CAUTION: To prevent damage to the product, use only the power cord that is provided with the product.

Also, refer to page 74: http://h10032.www1.hp.com/ctg/Manual/c00264334.pdf

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that'll help us and others see that we've got the answers!

Thanks!

Have a great day!

[york21]

Thanks for this.  I've ordered a step-down converter which I was advised on your helpline to get.  But I see p.74 says 'don't convert the voltage'.  Any thoughts?

[Betty0610]

This information is mentioned in the user guide. I would recommend sticking by that.

If the information I've provided was helpful, give us some reinforcement by clicking the "Accept as solution" button, that'll help us and others see that we've got the answers!

Thanks!

Have a great day!