Printed 3635 how to put to sleep mode?

[Zoom81]

Wondering how to put this printer in sleep mo ode or standby mode as I have add my printer and able to operate it . I thought the printer will be in sleep mode. The printer been like 4 to 5 hours still on . Pls help ? Been searching from the virtual chat but not helping at all . Do I need to everytime on n off my printer ? 

[sandytechy20]

@Zoom81

Welcome to HP support community.

Yes, you can set the sleep mode.

To change the time to Sleep mode

1. Open the embedded web server (EWS).

To open the embedded web server through a network

• From the printer control panel, press the Wireless button and the Information button together to print the network configuration page.
• Find out the IP address or hostname of the printer from the network configuration page.
• In a supported web browser on your computer, type the IP address or hostname assigned to the printer. For example, if the IP address is 192.168.0.12, type the following address into a Web browser: http:// 192.168.0.12.

2. Click the Settings tab.

3. In the Power Management section, click Energy Save Mode, and select the desired option.

4. Click Apply.

I hope that helps.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.

[Zoom81]

Now, I have another problem , 

the embedded web server the administrator have locked . 

I try to put in the same log in and password was unable to log in . 

How reset the password to the embedded web server ?

the whole day trying to log in but still it’s said is locked by the administrator. 

 Pls advise . 

[sandytechy20]

@Zoom81

Perform a network reset on the printer to reset the EWS login password.

Here are the steps:-  Press the Wireless button and the Cancel button from the printer control panel at the same time, and then hold them for three seconds. 

Then connect the printer again to computer, with these steps:- Click here

I hope that helps.

To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.

Cheers.