Printer Driver for HP OfficeJet Pro 8715 All-In-One

[tkaab]

Where can I find the printer driver for "HP OfficeJet Pro 8715 All-In-One?"  I can only find a printer driver for 8710 on the HP website.

[Dragon-Fur · Accepted solution]

@tkaab

Printer Homepage

Drivers, Software and Videos, How-to, Troubleshooting, Manuals, Product Information, and more

HP OfficeJet Pro 8715 All-in-One Printer

Your printer uses the same driver as the "8710" -- the model series is the same.

HP OfficeJet Pro 8710 All-in-One Printer series Full Feature Software and Drivers

Reference

This document is for HP OfficeJet 8702, and OfficeJet Pro 8710, 8715, 8718, 8719, 8720, 8725, 8728, 8730, 8740, and 8745 All-in-One printers.

•  Printer Specifications for HP OfficeJet Pro 8700 Printers

Different regions, markets, and places of purchase might slightly different model names.

Click Thumbs Up to say Thank You!

Answered? Click my post "Accept as Solution" to help others find it.

[tkaab]

Thank you.  I appreciate the response.

[Dragon-Fur]

@tkaab

You are welcome.

For the record, "shared" driver setup within a given printer series is not obvious - thanks for asking the question.  The information will likely help others wondering about the same thing. 

Happy Printing!

Thank you for participating in the HP Community Forum.

We are a community of HP enthusiasts dedicated to supporting HP devices and technology.

[RGMTRAC]

Hi , I as MANY others suddenly were unable to PRINT IN COLOR. This was rather confusing as we had been printing B/W and Color since date of purchase in May 2018. At first I installed as local to Secondary WS, then moved it to Primary WS, then finally had 3 WSs printing to the Networked 8715. All was well.  On the weekend of May 4th ,  I had to move the entire operation and install on New WS. Right off the start Printer could not be found.  When I finally got it to print all it would print was B/W until  until May 7th at 8PM.  ALL Blogs and HP references led me down the wrong trail. After repeated installs as Direct LPT1, USB Wireless, and Network via router  ALL "Solutions" were failing.  I decided to throw everything at 8715 after uninstalling ALL printersand  assigning a Genric Text Ptr while under Admin NOT New USER Login.

I installed off CD and when it asked me to confirm connect I did and while it was installing I pulled the USB cord and SW came back asking me to do a Wireless USB connect. I did run that and after it installed I decided to reinstall as a wireless printer and again it asked me to attach the USB cable, I did. I  was able to print a Dr Scan Print test but nothing else. So now I decided to Connect the Ehternet cable which has to be a USB 3.0 NOT USB 2.0, chnaged the default IP settings, restarted the printer and noticed that under User BW is Only Default No Color. I went back to Admin login and noticed that It had color options. This led me to ACL for Printer and noticed USer had Admin and User So I removed User privileges on New User and restarted ptr. I logged in to New User Open a PPT Color File and with MY  Installtion Solution Not HPs I was finally able to Print in Color. It has remained as I set it now for two days or until May 10th.

HP needs to review their answers and solutions