Printer not registering on HP SMart, there a solid Amber light on the status bar in the front,

[school_1]

HP LASERJET MFP M234DWE not registering with HP smart cannot complete setup. since then ive not been able to use the printer. its a new printer and i am trying to setup for wireless use. i hav also tried using usb but to no avail. any help with setting up would be greatly appreciated 

[Betty0610]

@school_1

Welcome to the HP Support Community.

I'd be happy to help.

Let's remove and add web services:

1. Open the printer home page (the embedded web server or EWS). See To access and use the Embedded Web Server (EWS). 2. Click the HP Web Services tab. 3. In Web Services Settings, click Disable Web Services.

1. Before you set up Web Services, make sure your printer is connected to the Internet. 2. Open the printer home page (the embedded web server or EWS). See To access and use the Embedded Web Server (EWS). 3. Click the HP Web Services tab. 4. In Web Services Settings, click Enable, and follow the on-screen instructions to accept the terms of use. 5. If prompted, choose to allow the printer to check for and install printer updates.

NOTE: ● If prompted for a password, enter the PIN from the label on your printer. See Things to note when accessing EWS. ● If prompted for proxy settings and if your network uses proxy settings, follow the on-screen instructions to set up a proxy server. If you do not have the details, contact your network administrator or the person who set up the network. ● If a printer update is available, the printer downloads and installs the update and then restarts automatically. Repeat the instructions above to set up HP Web Services.

6. After the printer is connected to the HP server, the printer prints an information sheet. Follow the instructions on the information sheet to finish setting up Web Services.

To open EWS, go to Page 41, 42 and follow the steps there: http://h10032.www1.hp.com/ctg/Manual/c06759742.pdf

Let me know if this helps.

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution button, that'll help us and others see that we've got the answers!

Thanks!

Have a great day!