Printing drawing Frame(180x287) on A4 format.

[Stiven123]

Hy! I will print on A4 Format a drawing Frame with dimensions 180x287.But it wont print whole frame.

I have tried in Microsoft Word and Acrobat reader to adjust margins but it wont print whole Frame.

[Dragon-Fur]

@Stiven123 

This older printer is an "odd-bird" for a DeskJet printer.

It supports smaller margins on all sides AND one size of paper is even marked as supported for Borderless printing.

Printer Specifications for HP Deskjet 2510, 2515, 2529 Printers

Borderless B5

182 x 257 mm (7.17 x 10.12 in)

 A4 paper size

A4	210 x 297 mm (8.27 x 11.69 in)

Print margins

The document margins must match (or exceed) these margin settings in the portrait orientation.

Figure : Margins in portrait orientation

Media	1. Left (LM)	2. Right (RM)	3. Top (TM)	4. Bottom (BM)*
U.S. Letter U.S. Legal A4 U.S. Statement 8.5 x 13 inch Customized media Photo media U.S. Executive B5 Cards Custom-sized media Photo media	3.2 mm (0.13 inch)	3.2 mm (0.13 inch)	3.2 mm (0.13 inch)	Windows: 3.2 mm (0.13 inch) Macintosh and Linux: 12 mm (0.47 inch)
Envelopes	3.2 mm (0.13 inch)	3.2 mm (0.13 inch)	16.5 mm (0.65 inch)	16.5 mm (0.65 inch)

If the border won't print as constructed,

Consider / Try

Reduce the size of the border to pull the edges inside the margins

OR

Set the Print size to Fit / Shrink to Fit

References / Resources

HP Printer Home Page - References and Resources

Learn about your Printer - Solve Problems

“Things that are your printer”

When the website support page opens, Select (as available) a Category > Topic > Subtopic

NOTE: Content depends on device type and Operating System

Categories: Alerts, Troubleshooting, Ink & Paper, HP Software / Drivers / Firmware Updates , Setup & User Guides, Product Specifications, Account & Registration, Warranty & Repair

Open

HP Deskjet Ink Advantage 2515 All-in-One Printer  

Thank you for participating in the HP Community --

People who own, use, and support HP devices.

Click Yes to say Thank You

Question / Concern Answered, Click my Post "Accept as Solution"