Printing envelopes

[Placer1]

I have noted that some time ago this question was raised, in loading a DL size envelope the printer states its not the correct size after selecting the correct print options from MS Word.

I have downloaded the help programmes and had them check the drivers and software all seems good....from the options window on the printer there is no option to select specific sizes for envelopes as seen on a YouTube video, I am assuming the printer detects the envelope size and takes it from there.

All the necessary sotware is downloaded to my PC, the printer states its software is up to date.

Please can the community advise me on why I cant print envelopes.

thanks

[Dragon-Fur]

@Placer1 

====================================================================

Welcome to the HP Community.

Be Aware:

Do not respond to individuals who include phone numbers or email addresses in public posts.

Do not respond to individuals who ask you to provide private information in a public Post.

These people might be scammers trying to steal your information / money.

====================================================================

Some Ideas...

DL

220 mm x 110 mm

8.66 inches x 4.33 inches

Size in inches 8.7 inches  wide X 4.3 (or 4.4) inches in height

What the printer can do:

 Product Specifications for the HP ENVY Photo 6230 All-in-One Printer (K7G25B)

and

Media Size (facet)	Letter; A4; B5
Media Sizes Custom (imperial)	3.85 x 8.5 to 5 x 12.2 in
Media Sizes Custom (metric)	97.79 x 215 to 127 x 355 mm
Media Types	Plain Paper; HP Photo Papers; HP Matte Brochure or Professional Paper; HP Matte Presentation Paper; HP Glossy Brochure or Professional Paper; Other Photo Inkjet Papers; Other Matte Inkjet Papers; Other Glossy Inkjet Papers, Plain Paper, Light/Recycled
Media Weight Recommended (imperial)	18 to 22 lb
Media Weight Recommended (metric)	70 to 90 g/m²
Media Weights Supported, By Paper Path (Imperial)	16 to 80 lb
Media Weights Supported, By Paper Path (metric)	Tray 1: A4: 75 to 90 g/m²; HP envelopes: 75 to 90 g/m²; HP Photo Paper: up to 300 g/m²; HP 10 x 15 cm photo paper: up to 300 g/m²

The following assumes the Full Feature Software (full driver printer software) is installed on your computer.

Printer does not always detect paper size / type.

In fact, you need to tell the printer what you are doing.

Load the paper (envelopes) in the printer according to the instructions in the manual.

Pay attention to the "Feed" settings > flap side, orientation (short sides front and back) and Rotation

User Guide

Pages 18-19

Next,

Check / Adjust / Retain the Paper at the Printer Display Panel

Section is not applicable to printers lacking a printer display panel.

Open Printer Tray,

If you have not yet done so, add desired paper type

Wait a couple of seconds…

Close Tray

IF applicable for your printer:

Look for a message on the Printer Control / Display Panel,

Click Modify (wording varies), set the paper size and type, Click OK

Note  – Printer Display Panel > Adjusting the paper size:

If the size of your Paper Size is not in the Drop-down menu,

Select Custom (likely the last selection in the list)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Embedded Web Server (EWS)

EWS option is applicable to network connected printers.

If the printer is on the network,

If the EWS feature is supported on your printer,

Use the Embedded Web Server (EWS) to view / configure your printer.

Open your favorite browser > type / enter Printer IP address into URL / Address bar

Tab Settings > Preferences > Tray and Paper Management

If applicable, check the Advanced section (at the bottom of the Tray and Paper Management menu)

Click Apply to save changes

NOTES

• Size not listed in the Drop-down menu?  Select Custom (likely the last selection in the list)
• EWS is also available in HP Smart Windows and HP Smart Mobile > Settings > Advanced
• Features and options differ by printer model and type.

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=

Set the Preferences – Windows

This section is not applicable to Mobile Printing.

Printing Preferences are available directly from the driver and / or might be called "Printer Properties" / "Shortcuts" (or similar) from within printing software / applications.

Preferences and Envelopes: 

Select / leave Printing Preferences shortcut to "Everyday Printing" or something equally benign. 

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Next, Create your envelope

Custom size

Width 8.7 inches

Height 4.3 inches (or 4.4 inches)

Example,

Word > Mailings > Envelope - Custom Size Envelope

Rabbits_and_Chickens_Test_Envelope_7x5_3

References / Resources

Method - Use the Easy Start Wrapper to Install the Full Feature / Full Driver Software

For printers that support the option,

Use the Easy Start wrapper to install and configure the printer software.

• Home Page - HP Easy Start 
• Open Category Software and Drivers 
• Topic: Software-Utility 
• Download-and-Save  the current version of the Easy Start wrapper to install your print software 
• If using USB:  Disconnect the USB cable between the printer and computer before installing the software.

• Right-Click on the downloaded package and "Run as Administrator" to start the installation

• Select to install the “Full Driver” / “Full Feature Software”
• If using USB:  Connect the cable when instructed to do so (near the end of the installation process).
• After the software is installed, Restart the computer and log in.

Notes >> Easy Start... The Journey

1. About 2/3 of the way through the setup, you will be given the opportunity to select the software - select the "Full Driver" set (as opposed to the basic driver or other application).

1. You can skip / ignore suggestion(s) that you add the HP Account – you’ll need the account at some point, for now, you can skip this suggestion (as many times as it insists it’s a good idea) during the full driver software installation.

1. If you see it, you can skip / ignore suggestion(s) regarding Instant Ink subscription.  Instant Ink subscription is NOT mandatory.

1. Full driver provides print and scan functions supported by your printer.

========================================================================

Reminder to those reading:

Custom Sized Envelopes have "other" size restrictions.

For example,

If the envelope is "too short" (not wide enough as you are looking at the envelope face up, side to side)

the envelope size will be rejected and an "alternative" offered based on what the printer can handle.

What does that mean?

As shown in the example, a 5.8 " wide envelope, 4.4 inches tall is not "long enough" on the feed direction.

Example

Rabbits_and_Chickens_Test_Envelope_Custom_1

HP Printer Home Page - References and Resources – Learn about your Printer  - Solve Problems

 “Things that are your printer”

NOTE:  Content depends on device type and Operating System

Categories:  Alerts, Access to the Print and Scan Doctor (Windows), Warranty Check, HP Drivers / Software / Firmware Updates, How-to Videos, Bulletins/Notices, Lots of How-to Documents, Troubleshooting, Manuals > User Guides, Product Information (Specifications), more

When the website support page opens, Select (as available) a Category > Topic > Subtopic

HP ENVY Photo 6230 All-in-One Printer 

Thank you for participating in the HP Community.

The Community is a separate wing of the HP website - We are not an HP business group.

Our Community is comprised of volunteers - people who own and use HP devices.

Click Thumbs Up to say Thank You.

Question Resolved / Answered, Click "Accept as Solution"

[Placer1]

Thanks for the help.

Neverthe less it does not solve my issue, when I have selected the envelope size in MS Word and go to print, the DL envelopes in the printer are seen as the wrong size/type, I have the full version of thr software I have also run the diagnostics. There must be a software update that will add another function to the window on the printer so i can tell it there is a diffrent size paper inside it and to print, the auto detection just does not function.

[Dragon-Fur]

@Placer1 

You are welcome.

I may not be able to help.

My printer does not support "auto detect" paper size - After I change paper, open-close the tray (tray 2 in the OfficeJet Pro 9025), I must modify / accept the paper size / type settings on the printer panel.

I've had to use Word > Mailings > Envelope > Custom envelope size selection on a #10 envelope on occasion to correct a spurious feed issue that defies other remedies.

I've had to remove (uninstall) non-working printer software and reload it.

What else?

Manual uninstall / restart / install would normally work for non-working software.

If not, the "doctor" will do a couple of extra "checks" and might fix whatever is happening in your system.

If the printer software is installed but possibly not working as expected due to corruption or missing data links, consider:

Use this particular version of the doctor...

Offline Doctor

ftp://ftp.hp.com/pub/printers/hppsdr/patches/HPPSdr.exe

• Download and Save the doctor to your computer
• Open File Explorer > Navigate to the folder in which you saved the file (likely Downloads)
• Execute the doctor – Answer any prompts /  let the process complete
• Restart the computer, log in, and wait for the final steps in the Doctor to finish.
• Check for any difference.

Original Notes – Contributed by ShlomiL

Paraphrased

Connection Issues

• Print and Scan Doctor Version creates a secondary queue for printing with TCP/IP port.
• Be sure to restart your PC and allow the utility to complete the process, then check for any difference.

• Try printing and check for any change, if the same remains try printing using the newly added print queue copy (Copy1) and check for any difference.

Thank you for participating in the HP Community.

The Community is a separate wing of the HP website - We are not an HP business group.

Our Community is comprised of volunteers - people who own and use HP devices.

Click Thumbs Up to say Thank You.

Question Resolved / Answered, Click "Accept as Solution"

[Placer1]

Hyperlink does not work.....