Printing issues

[Daxishhh]

I am not able to print 

The cartage light constantly blinks

And error light also on everytime i start printer.

I think it is colour head problem.

[Meghana_10]

@Daxishhh, Welcome to the HP Support Community – it’s great to have you here!

I appreciate you taking the time to share your question. I'm more than happy to assist with this and provide a solution that works for you.

When all lights on your HP Smart Tank 580 blink, it usually indicates a printer error or incorrect cartridge installation. Since this happened after reinserting the ink cartridge, let’s try these steps:

Power Reset

1. Turn off the printer.
2. Unplug the power cord from the printer and wall outlet.
3. Wait 60 seconds.
4. Plug the cord back in and power on the printer.

Check Ink Cartridges

1. Open the ink access door.
2. Remove both cartridges.
3. Inspect for:
   • Protective tape still on the cartridge nozzles (remove if present).
   • Ink buildup or debris on contacts (clean gently with a lint-free cloth).
4. Reinsert cartridges firmly until they click into place.

Check Display for Error Icons

From your photo, the display shows:

• Exclamation mark (!) and blinking lights → Cartridge or system error.
• Ensure cartridges are genuine HP and properly seated.

Update Firmware

If the printer powers on normally after reset:

• Download and install the latest firmware Official HP® Support
  Update the firmware on an HP printer | HP® Support

Hard Reset if Issue Persists

If lights still blink:

• Press and hold Cancel (X) + Wireless buttons together for 5 seconds to reset the printer.

HP Smart Tank Printers - Blinking lights and error codes | HP® Support

I hope your issue is now resolved. If not, feel free to reply and we’ll continue helping until everything’s sorted!