Reinstall HP driver for P1102w printer

[JanassC]

**********************************************UPDATE********************************************************

I have resolved issue (not sure how I did it, but it's done).  I have tried to delete this message but was unable to and I have been at the problem for hours now and I'm not going to try and figure this one out.  Sorry.

**************************************************************************************************************

Edition Windows 10 Home
Version 21H2
Installed on ‎2022-‎02-‎14
OS build 19044.1586
Experience Windows Feature Experience Pack 120.2212.4170.0

Recently had to have PC configured from scratch with all drivers being wiped. I downloaded "hp_LJP1100_P1560_P1600_Full_Solution-v20180815-50157037_1 " to reinstall driver.  I have tried all three methods (Configure to print over the wireless network, Configure to print using USB, Connect to a configured Wireless Network Printer).

The printer did have direct print turned on and i was able to print from Apple phone and iPad.  I deleted direct print from printer by resetting back to factory settings. I retried a new install on PC.  Same errors - when I plug in the printer USB cable to PC in all three scenarios above  it did not recognize the printer was connected. I realize there "could" be an issue with the cable (I don't have another cable to try)  but highly doubt it as it has never moved off of the printer in a few years.

I have also tried to add it via the >Settings>Printers & Scanners>Add printers & scanners and then I get "Enter WPS PIN for your multi function printer". How do I find what the WPS PIN number is to see if this will work?

Are there any things I can try short of buying a new cable to rule that out.  I have been trying to find instructions online that I had a few years ago to set it up to at least work from my iPhone and iPad without success.  Thank you for any suggestions.