Resetting the wireless network on printer

[MMciver]

I need to reset the wireless network on my printer. How do I do that for this printer?

[Echo_Lake]

@MMciver

Welcome to HP Community,

We value your time with us, we have routed the details of your case to the concerned team,

And they will get back to you shortly to help get this sorted.

Stay Tuned,

And have a good day

[Jay_G24]

Hi @MMciver,

I'd like to help with connecting the printer to the network.

 Connect the printer with WPS

Press and hold the wireless and the cancel button for 3 seconds to restore the network on the printer 

Use WPS to connect the printer to your wireless network.

1. Locate the WPS button on your router, but do not press it yet.

   If your router does not support WPS, skip to the next step to connect the printer with the HP Smart app.

2. Turn on the printer. If the printer is in sleep mode, press the Cancel button on the control panel.

3. On the printer control panel, press and hold the Wireless button for at least 3 seconds or until the wireless light starts to flash.

   note:

   HP Tango printers: Press and hold the Wireless and Power buttons on the back of the printer for 5 seconds. The Edge lighting flashes blue to indicate the printer is in WPS mode.

4. On the router, press and hold the WPS button for 3 to 5 seconds or until it shows that the WPS connection process has started.

   note:

   The printer stops searching for a WPS connection two minutes after the wireless button is pressed. If you were unable to press the WPS button within that timeframe, attempt these steps again.

   Once the printer connects to the wireless network, the blue Wireless light on the control panel turns on solid.

Hope this helps! Keep me posted. 

And, Welcome to the HP Support Community.

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping