Siigning in to Embedded Web Server

[jjdneves]

I can't sign in to Embedded Web Server. My printer is deskjet 2600. Help appreciated.

[Jeet_singh · Accepted solution]

@jjdneves,

Greetings and Welcome to the HP Support Community. 

Don't worry, I'm here to help! 

Let's get straight into this - 

Network Restore - Press the Wireless button and the Cancel button from the printer control panel at the same time, and then hold them for three seconds.

If the router has a WPS push button, try these steps to connect the printer to the network -

1) Press and hold the Wireless button on the printer for more than three seconds to start WPS push mode. The Wireless light starts blinking.

2) Press the WPS button on your router.

NOTE: THE MOMENT YOU PRESS THE WIRELESS BUTTON ON YOUR PRINTER, WITHIN 30 SECONDS YOU SHOULD PRESS THE WPS BUTTON ON THE ROUTER.

If this step is not successful, then we need to first connect the printer to a computer using a USB and then convert the wired connection to wireless as the printer does not have a control panel to enter the Wi-Fi password. 

Please refer to this link for steps.

You may also try setting up the printer using your mobile device -

How To Set Up a Wireless HP Printer from Android?

How to Set Up a Wireless HP Printer from an iPad or iPhone?

Hope this helps!

Let me know how that goes.

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Have a great day ahead 🙂

[jjdneves]

Hello Jeet,

Finally I used wireless to setup the printer. Interesting that by the end it asked for the printer password, which I've never set. In fact, I found out that it is the same as my PC. Strange.

Best regards,

José

[sandytechy20]

@jjdneves

Good to know that issue is resolved.

Feel free to contact us in the future if you need assistance.

Cheers.