Squeaking while printing/changing cartridges

[Ashley246]

I have an Officejet 9015 that has suddenly begun a high pitched squeak when printing.  The printer bar (apparatus that holds the cartridges in case I'm naming it incorrectly) seems to be the culprit.  I have run through the suggestions of installing each cartridge individually (all squeak, apparatus squeaks without cartridges too) as well as the powering off/on suggestion.  What's the next step to fix this obnoxious squeak? 

[Irfan_06]

Hi @Ashley246,

Welcome to the HP Support Community.

Thank you for posting your query, I will be glad to assist you.

I understand you're experiencing an issue with your printer that is making noise.

I apologize for any inconvenience this may have caused, I'm here to help you today.

Please follow the steps below to fix the issue.

A) Perform a power drain.

1) Take out the cartridges

2) Unplug the power cord from the printer & wall.

3) Press and hold the power button down for 15 seconds and release the power button, wait for about 30 seconds.

4) Plug the power cord back into the printer and wall, ensure the printer is plugged into the wall & not into a surge protector.

5) Insert the cartridges back into the printer.

Remove the cartridges > Unplug the power cord > Wait for 30 seconds > Plug the power cord back in > Insert the cartridges

B) Kindly refer to the steps on this link to update the printer firmware and let me know if that resolves the issue.

C) Refer to the steps on this link to further troubleshoot.

Note: The printer model might differ but the troubleshooting steps are the same.

D) If the issue still persists, refer to the steps on this link to restore factory defaults and let me know if that resolves the issue.

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.

I hope this helps.

Take care and have a great day ahead!

Irwin6

HP Support