USB Composite Device not working with USB 3.0

[JimmytheBike]

My new  computer has only usb 3.0 ports.   Hate to lose my faithful laserjet.  How about i run from 3.0 computer port to usb 2.0 junction box, and from there to the printer?

[The_Fossette · Accepted solution]

@JimmytheBike,

Welcome to the HP Forums!

Thank you for posting your query on this forum, it's a great place to find answers.

I reviewed your post and I understand that you want to know whether using a USB 3.0 to a USB 2.0 USB extension to make the printer work.

Don’t worry, I assure you I will try my best to get this sorted.

I recommend you try and check whether the USB extension works, I would say it may not work however there is no harm in trying.

Hope that answers your question and you have a great day!

If you wish to show appreciation for my efforts, mark my post as Accept as Solution. Your feedback counts!

Cheers!

[JimmytheBike]

I am happy to report that my strategy worked.   Our laserjet HP P2055dn would not work with my new Microsoft laptop, with only usb 3.0 ports.   I fooled the priner by  running the usb cable from the computer's 3.0 port  to a usb 2.0 hub, and then another usb cable from the 2.0 hub to the printer.   Seems to be working just fine -- the trusty laserjet prints again!

[The_Fossette]

@JimmytheBike,

Perfect, I am really glad to hear that! 

If any other questions arise, please feel free to write back to me.

If you wish to show appreciation for my efforts, mark my post as Accept as Solution. Your feedback counts!

Good day! Take care 🙂

Cheers!

[JimmytheBike]

Accept as Solution indeed!

(because this is an archived thread, the regular Accept as Solution button does not appear)

[The_Fossette]

@JimmytheBike,

Thank you so much.

If any other questions arise, please feel free to write back to me.

Cheers!