-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
Create an account on the HP Community to personalize your profile and ask a question
Your account also allows you to connect with HP support faster, access a personal dashboard to manage all of your devices in one place, view warranty information, case status and more.
Check some of the most frequent questions about Instant Ink: HP INSTANT INK, HP+ PLANS: INK AND TONER.
Check out our WINDOWS 11 Support Center info about: OPTIMIZATION, KNOWN ISSUES, FAQs AND MORE.
It has been a while since anyone has replied. Simply ask a new question if you would like to start the discussion again.
2
0
0
HP Recommended
1 ACCEPTED SOLUTION
Accepted Solutions
HP Recommended
Hi,
Apologies for jumping in.
A such may occuor when you only have a USB 3 port on your PC.
Follow tese steps to bypass the error:
Click the Start button and type %temp% into the search bar, then open the shown Temp folder.
Open the latest HP installation folder which begins with 7z (e.g. 7zs1234)
Open the Setup folder.
Locate the usbready.exe file and rename it into usbready.old.exe
Browse back to the main extraction folder (the folders who starts with 7z) and launch the Setup.exe file.
Now follow the installation and check for any difference.
Regards,
Shlomi
Click the Yes button to reply that the response was helpful or to say thanks.
If my post resolve your problem please mark it as an Accepted Solution 🙂
HP Recommended
Test the USB port of the PC by plugging in a USB flash drive to see if it is recognized by the operating system.
You say it is a new PC. Have you installed the USB drivers?
Windows 7 is unlike Windows 8,8.1 or 10. It won't automatically install the drivers on its own.
Try running the HP Print and Scan Doctor. It will troubleshoot your connection issues.
http://ftp.hp.com/pub/softlib/software13/printers/HPPSdr.exe
The issue should be in the printer section. I will move it for you.
I am a volunteer forum member. If my suggestion helped you solve your issue, help others by marking that post as the accepted solution. Say thanks by clicking on the Yes button next to the "was this reply helpful?"
HP Recommended
Hi,
Apologies for jumping in.
A such may occuor when you only have a USB 3 port on your PC.
Follow tese steps to bypass the error:
Click the Start button and type %temp% into the search bar, then open the shown Temp folder.
Open the latest HP installation folder which begins with 7z (e.g. 7zs1234)
Open the Setup folder.
Locate the usbready.exe file and rename it into usbready.old.exe
Browse back to the main extraction folder (the folders who starts with 7z) and launch the Setup.exe file.
Now follow the installation and check for any difference.
Regards,
Shlomi
Click the Yes button to reply that the response was helpful or to say thanks.
If my post resolve your problem please mark it as an Accepted Solution 🙂
2
0
0
HP Recommended
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
Didn't find what you were looking for?
Ask the community