Web Services password forgotten

[Raffaele26]

Hello, i forgot the web services password for my hp printer and now i can't operate the web services. What can i do? (it's not the default becouse i changed it a time ago) 

[Raj_05]

Hi @Raffaele26,

Welcome to HP Support Community.  
 

Thank you for posting your query, I will be glad to help you.

If you have forgotten the web services password for your HP DeskJet 3750 All-In-One Printer, you can reset it by following these steps.

1. Make sure your printer is turned on and connected to the same network as your computer or mobile device.
2. Open a web browser on your computer or mobile device and enter the IP address of your printer in the address bar. The IP address can usually be found on the printer's control panel or by printing a network configuration page.
3. Press Enter or Return to access the printer's Embedded Web Server (EWS).
4. In the EWS, navigate to the "Web Services" or "Network" section.
5. Look for an option to reset or change the password. The wording may vary depending on the printer model and firmware version.
6. Click on the password reset option and follow the on-screen instructions to create a new password.
7. Once the new password is set, make a note of it for future reference.

I hope this helps. 
 

Take care and have a good day.

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

Alden4
HP Support 

[Raffaele26]

Thanks for the reply but the problem is when i click on ews i have to write password so i can't be nothing if i haven't it...

[Raj_05]

Hi @Raffaele26,

Thank you for your response, 

Due to limited support, I would request you contact our HP Support and our Support Engineers should be able to sort this out. HP Support can be reached by clicking on the following link.

https://www.hp.com/contacthp/

Please feel free to contact us here anytime you need any further assistance.

Have a great day!

Alden4
HP Support 

[Raffaele26]

ok so i will contact support then. Anyway thank you so much.

[sandytechy20]

@Raffaele26

You are welcome.