-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Printer Setup, Software & Drivers
- Re: Error Laserjet M252DW expired certificate Mac - Laserjet...

Create an account on the HP Community to personalize your profile and ask a question
09-03-2026 12:50 AM
I use AirPrint on a MAC and for the first time ever I have an expired certificate which I cannot overcome.
I have
cleared the print queue
Power off and restarted both the printer and the computer
Removed and reinstalled the printer
I still cannot print.
Solved! Go to Solution.
Accepted Solutions
09-03-2026 01:03 AM - edited 09-05-2026 06:06 AM
Hi @ARL29 , mate,
Please follow steps from the next video to fix Expired Certificate:
>> https://www.youtube.com/watch?v=FvaPeprU_mU
* Click YES to say thank you,
* Click Accepted as Solution when question is answered.
Best regards,
ferRX.
09-03-2026 01:03 AM - edited 09-05-2026 06:06 AM
Hi @ARL29 , mate,
Please follow steps from the next video to fix Expired Certificate:
>> https://www.youtube.com/watch?v=FvaPeprU_mU
* Click YES to say thank you,
* Click Accepted as Solution when question is answered.
Best regards,
ferRX.
09-03-2026 02:24 AM - edited 09-03-2026 02:25 AM
Many thx for the information. It is definitely the problem but I still have a certificate problem. How do I get the updated certificate onto the printer. I have been through the steps, generated a new certificate but it appears extra steps are required to update the printer
09-05-2026 12:25 AM
Thanks for your help. Not certain if it is an old computer our what. You were 100% correct it was the certificate. The simplest way was to use the computer, enter the IP address of the printer which brings up the web page for the printer. Then update and save the new printer certificate. The printer must then be restarted.
FerRX you probably were fully aware of this , and it was the simplest way. I am very grateful for your input as IO did not wish to be faced with a new printer and sorry if I was a bit slow to work things out.