hp printer software

[printen]

every time I start the program from the printer it falls outside the screen and I cannot get it smaller and / or full screen while I am not bothered with all other programs. how is this possible and how do i solve it.

[Jeet_singh]

@printen,

Thank you for posting your query on HP Community,

What happens when you try to print the printer diagnostics page from the printer.

Are you able to make a copy from the printer?

Let's try these steps here: 

Print a Print Quality Diagnostic report from the printer control panel, and then evaluate the results.

1. Load the printer with plain white paper.

2. On the printer control panel, swipe left on the display, and then touch Setup .

3. Touch Tools.

4. Swipe up on the display, and then touch Print Quality Report.

Evaluate the report for any defects. 

• If there are defects found, try the steps mentioned in this document. 

If the print diagnostics comes out fine, then I would suggest the next step would be to run Print and scan doctor. 

Let's run HP Print and Scan Doctor: 

If you are facing any issue while using the printer then try using HP Print and Scan Doctor (PSDR). PSDR is an automated tool which can diagnose and resolve printing and scanning problems. Please go to this link: HP Printers - Using HP Print and Scan Doctor (Windows)  to download and run HP PSDR. Once you open the program, select your printer and click on “Fix Printing” to automatically diagnose and fix the issue.

I suggest you uninstall the printer drivers from the root level and then reinstall them by following the below steps:

• Press “Windows key” + “r” to get the “Run” window.
• Type "services.msc" to get Services – Go to “Print spooler” – Right-click and “Stop” the service.
• Now again open "Run" - Type “spool” and OK - Go to PRINTERS folder - delete everything in that folder.
• Go to services again - Start the print spooler.
• Now check for issue resolution.
• If the issue persists, also try clean installing the printer drivers. Here are the steps:
• First, unplug the USB cable from the printer if present.
• Go to Control panel – Programs and feature – Select all the HP Envy printer entries and uninstall them.
• Now go to Control panel – Devices and printer – Select all the printer entries and remove the device.
• Press the "windows key" + "r" to get the "Run" window open - Type "printui.exe /s" (There is a space between .exe & /) and press enter.
• Under print server properties, go to drivers - remove any entry there as well.
• Again, go to the Run window, type – “c:/programdata” – Go to Hewlett Packard folder, remove any printer related folders & files.
• Restart your computer.
• Please click here (Please select the correct Operating system and version of Windows before downloading and installing the full feature software for this printer).
• Connect the USB cable if prompted and follow the on-screen instructions to complete the installation.

Let me know how it goes!

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!