incoorect priny in windows 10

[vahidJ]

i have hp printer M15W.this printer incorrect print in windows 10 64bit

i updated the firmware and installed the driver but problem was not solved and it still prints half of the page

it prints correctly with other computer  but with my computer it prints incompeletely

[Anand_Andy]

Hi @vahidJ,

Welcome to the HP Support Community

I understand you are facing a Print Quality issue with your HP HP LaserJet Pro M15W Printer. Not to worry I will help you to get a resolution to resolve the issue.

To assist you better:

• Which application are you trying to print from?
• Have you tried printing from any other applications?

While you respond to that, Let's perform a power drain: 

• With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.
• Remove USB cable, if present.
• Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.
• Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord (This is important) and then plug back the power cord to the printer.
• Turn on the printer and wait till warm-up period finishes and the printer is idle

Update the printer firmware 

• Click here to download and install the latest printer firmware from your product
• Click here to know different methods of updating printer firmware.

If the issue persists, then please follow the below steps to resolve the issue.

Use HP Print and Scan Doctor:

Download a special version of HP Print and Scan Doctor specifically created to help with printer offline conditions.

1. Download HP Print and Scan Doctor.
2. Run HPPSdr.exe from the download location on your computer.
3. Once HP Print and Scan Doctor opens, click Start, and then select your printer.
   • If your printer in not in the list, turn it off and on, and then click Retry.
   • If there is a connection problem, follow the instructions in HP Print and Scan Doctor.
4. If a screen prompts you to turn on printer updates, click Yes.
5. If a screen prompts you to make your printer the default printer, click Yes.
6. Select Fix Printing

If the issue persists, I recommend you delete the driver and root level and retry, follow the steps below: 

1) In Windows, search for and open Programs and features 

2) Select your HP Printer 

3) Select Uninstall 

4) In Windows, search for and open Devices and printers 

5) In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose ‘Delete’ or ‘Remove Device’ 

6) Open up the run command with the “Windows key + R” key combo. 

7) Type printui.exe /s and click Ok. (Note: there is a space in between “printui.exe”

😎 Click on the “Drivers” tab 

9) Look for HP Printer driver. If you see it Click on it and click Remove at the bottom 

10) Select Ok 

11) Select Apply and Ok on the Print Server Properties windows 

12) Close Devices and Printers.

Use this link to download and install the new driver. Configure the printer and try printing.

Hope this helps! Keep me posted. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Yes" on the bottom right to say “Thanks” for helping