• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
Here is the solution for the error: "Encryption Credentials have expired" when attempting to print or scan from Mac OS or iOS devices: Click here to view the troubleshooting steps!
Check some of the most frequent questions about Instant Ink: HP INSTANT INK, HP+ PLANS: INK AND TONER.


Check out our WINDOWS 11 Support Center info about: OPTIMIZATION, KNOWN ISSUES, FAQs AND MORE.
HP Recommended
M111w

i have a network problem with router wifi with mac os 26 and ios 26.1

1 REPLY 1
HP Recommended

Hi @waleed32,

 

Welcome to the HP Support Community!

 

Thanks for reaching out!

We're thrilled to have the opportunity to assist you and provide a solution.

 

I understand your Samsung/HP M111w printer is having network issues with your Wi-Fi while using macOS 26 and iOS 26.1. Let’s go through a few steps to troubleshoot and fix this.

 

Check Printer Connection
 - Ensure the printer is powered on.
 - Press the Wi-Fi/WPS button on the printer to verify it is connected to the same Wi-Fi network as your Mac and iOS device.
 - Print a Network Configuration Page from the printer to confirm the SSID and IP address.

Restart Devices
 - Turn off your printer, Mac, iPhone/iPad, and Wi-Fi router.
 - Wait 30 seconds, then power them back on in the order: router → printer → Mac/iOS device.

Reconnect Printer to Wi-Fi
 - On the printer, use the Wireless Setup Wizard to reconnect to your Wi-Fi network.
 - Make sure you enter the correct SSID and password.

Forget and Rejoin Wi-Fi on Mac/iOS
 - On macOS: System Settings > Network > Wi-Fi > Advanced, remove your Wi-Fi network, then reconnect.
 - On iOS: Settings > Wi-Fi > tap your network > Forget This Network, then reconnect.

Update Software and Drivers
 - Ensure macOS 26 and iOS 26.1 are up to date.
 - Install the latest printer driver or Samsung/HP Smart App from the official website or App Store.

Use Correct Printer Selection
 - On Mac: When printing, select your printer by its IP address or network name (avoid “Bonjour” issues).
 - On iOS: Use AirPrint if the printer supports it, or the official app.

Check Firewall and Router Settings
 - Make sure your Wi-Fi router does not have client isolation enabled, which can block devices from communicating.
 - Temporarily disable firewalls on macOS to test connectivity.

Test Network Printing
 - Print a test page from macOS and iOS.
 - If it works on one device but not the other, the issue may be OS-specific or app-specific.

I hope this helps.

 

I'm glad I could help! 😊 If this resolved your issue, please mark it as "Accepted Solution" and click "Yes" on "Was this reply helpful?" Your feedback not only keeps us going but also helps others find the solution faster! 👍

 

Take care and have an amazing day ahead! 🚀

 

Best regards,

Kuroi_Kenshi
I am an HP Employee

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.