printer screen frozen in HP downloading

[bchicella]

my HP envy photo 7855 is frozen on the HP downloading screen.  The blue line fills up but then nothing happens.  I cannot turn off printer from on/off switch.  I have tried connecting with wired connection to computer and it does the same thing.

[Betty0610]

@bchicella

Welcome to the HP Support Community.

Let's try to hard reset the Printer here:

Turn the printer on, if it is not already on.

1. Wait until the printer is idle and silent before you continue.
2. With the printer turned on, disconnect the power cord from the rear of the printer.
3. Unplug the power cord from the wall outlet.
4. Wait at least 60 seconds.
5. Plug the power cord back into the wall outlet.
6. NOTE: HP recommends connecting the printer power cord directly to the wall outlet.
7. Reconnect the power cord to the rear of the printer.
8. Turn on the printer, if it does not automatically turn on.
9. Wait until the printer is idle and silent before you proceed.

Try removing the ink cartridges and then inserting them back in.

If the issue persists, we'll have to perform a reset on the Printer for this. I have sent you a private message, for more details that cannot be shared in a public post.

Please do check your inbox on the forums page for the private message.

Let me know if this helps.

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution button, that'll help us and others see that we've got the answers!

Thanks!

[pmb31]

 ‎09-18-2019 01:05 PM

@bchicella

Welcome to the HP Support Community.

Let's try to hard reset the Printer here:

Turn the printer on, if it is not already on.

1. Wait until the printer is idle and silent before you continue.
2. With the printer turned on, disconnect the power cord from the rear of the printer.
3. Unplug the power cord from the wall outlet.
4. Wait at least 60 seconds.
5. Plug the power cord back into the wall outlet.
6. NOTE: HP recommends connecting the printer power cord directly to the wall outlet.
7. Reconnect the power cord to the rear of the printer.
8. Turn on the printer, if it does not automatically turn on.
9. Wait until the printer is idle and silent before you proceed.

Try removing the ink cartridges and then inserting them back in.

If the issue persists, we'll have to perform a reset on the Printer for this. I have sent you a private message, for more details that cannot be shared in a public post.

Please do check your inbox on the forums page for the private message.

Let me know if this helps.

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution button, that'll help us and others see that we've got the answers!

I need the PM details as my printer is FROZEN on the blue Screen at start up.  Help Please.