unexpected configuration problem 0x80070709

[Pluis1962]

Due to circumstances I was forced to install everything all over again. Ever since this installation HP Smart communication states that everything is ok with the printer. The information on the touchscreen of the printer gives the same information. However when I actually give want something to print I get the remark unexpected configuration problem 0x80070709 what to do?

[Betty0610]

@Pluis1962

Welcome to the HP Support Community.

Let's try to do a root uninstall and reinstall of the software:

Unplug any USB cable, if any, before doing this.

1.) In Windows, search for and open Programs and features

2.) Select your HP Printer

3.) Select Uninstall

4.) In Windows, search for and open Devices and printers

5.) In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose 'Delete' or 'Remove Device'

6.) Open up the run command with the "Windows key + R" key combo.

7.) Type printui.exe /s and click Ok. (Note: there is a space in between “printui.exe” and “/s”)

8.) Click on the "Drivers" tab

9.) Look for HP Printer driver. If you see it Click on it and click Remove at the bottom

10.) Select Ok

11.) Select Apply and Ok on the Print Server Properties windows

12.) Close Devices and Printers

13.) Open up the run command with the "Windows key + R" key combo

14.) Type c:/programdata and click Ok. Go to Hewlett Packard folder, remove any printer related folders & files.

15.) Restart the computer.

Once done, please download and install the software from here:

https://support.hp.com/in-en/drivers

Let me know if this helps.

If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that'll help us and others see that we've got the answers!

Thanks!

Have a great day!

[grump1]

I installed my HP ENVY printer in a new computer with Windows 10. The message says I am ready to print, but when I try to print from the computer, a error message  0X80070709 appears and will not allow me to print.   

[The_Fossette]

@grump1,

Welcome to the HP Support Community!

I reviewed your post and I understand that you are facing issues printing from your computer.

Don’t worry, I assure you I will try my best to get this sorted.

Have you followed the steps suggested in the thread?

Are you able to make a copy?

Meanwhile, I recommend you run the HP printer and scan doctor and it will automatically fix the printing issues.

Here is how it is done.

Please download and run the HP Print And Scan Doctor from this Link: https://ftp.hp.com/pub/printers/hppsdr/HPPSdr.exe

Run PSDR v5.0.2 

Once the PSDR detects the Printer, it will show up the IP address and Software Status. 

Select the correct Printer and click on Next. 

PSDR will check if the Printer is on the Network and communication between the PC and the Printer. Once the connection check is done, click on Fix Printing 

Once PSDR goes through all checks and automatic fixes, click on Print a test page. 

Regardless if PSDR printed the test page or not, click on “NO PRINT” 

PSDR will then notify you that there is an update available, click on continue, and PSDR will apply the patch and ask for a reboot. 

Post restart the PSDR will run automatically to check for more issue.  If no issue found close PSDR. 

Also, try using the HP Smart App and let me know if that helps. Link: https://www.microsoft.com/en-us/p/hp-smart/9wzdncrfhwlh

You can refer to this Link: https://support.hp.com/in-en/document/c03561640 for more information on HP Smart App

Let me know how it goes and you have a great day!

If you wish to show appreciation for my efforts, mark my post as Accept as Solution. Your feedback counts!

Cheers!