Blue Wireless light is blinking

[Pall82]

Blue wireless light is blinking. I tired all methods that quick start guide suggests. But not working

[Kuroi_Kenshi]

Hi @Pall82,

Welcome to the HP Support Community! 

Thanks for reaching out about your query regarding your printer error!  

We're thrilled to have the opportunity to assist you and provide a solution.

Try these troubleshooting steps:

Restart Everything

• Turn off the printer, router, and computer/phone.
• Wait 30 seconds, then turn them back on.
• See if the light stops blinking.

Reconnect the Printer to Wi-Fi (WPS Method)

• Press and hold the Wireless button on the printer for 3 seconds (or until the light blinks rapidly).
• On your router, press the WPS button within 2 minutes.
• The blue light should stop blinking and stay solid once connected.

Use HP Smart App

• Download HP Smart App on your phone or PC.
• Open HP Smart → Select Set up a new printer.
• Follow on-screen instructions to connect the printer to Wi-Fi.

Reset the Printer's Network Settings

• Press and hold the Wi-Fi and Cancel buttons for 5 seconds.
• The wireless light will blink fast, meaning it's in setup mode.
• Now, try connecting using HP Smart again.

Check Router Settings

• Make sure the Wi-Fi network is 2.4 GHz (not 5 GHz, which many HP printers don't support).
• Disable MAC address filtering or enable DHCP in router settings.

Update Printer Firmware

• Go to HP Support (support.hp.com) and enter your printer model.
• Download and install the latest firmware update.

If the light still blinks after trying these steps, let me know! 😊

I'm glad I could help! 😊 If this resolved your issue, please mark it as "Accepted Solution" and click "Yes" on "Was this reply helpful?"—your feedback not only keeps us going but also helps others find the solution faster! 👍✨

Take care and have an amazing day ahead! 🚀

Best regards,