Can't connect to wifi.

[TiffanyVorbeck]

Can't get it to connect to wifi. 

[A_Gayathri]

Hi @TiffanyVorbeck ,

Welcome to The HP Support Community.  

Thank you for posting your query, I will be glad to help you.

I understand you are facing a connectivity issue with your HP DeskJet 2752 All-In-One Printer: Not to worry I will help you to get a resolution to resolve the issue.

Here are some steps you can try to troubleshoot the connectivity issue with your HP DeskJet 2752 All-In-One Printer:

• Check Wi-Fi Connection: Make sure your Wi-Fi network is working properly and other devices can connect to it without any issues.
• Printer Placement: Ensure that the printer is within the range of your Wi-Fi router. Sometimes, signal strength can affect connectivity.
• Restart Printer and Router: Turn off your printer and Wi-Fi router, wait for a few minutes, and then turn them back on. This can often resolve temporary connectivity issues.
• Wi-Fi Settings on Printer: On the printer's control panel, navigate to the Wi-Fi settings menu. Check if the printer detects your Wi-Fi network and try reconnecting to it. Make sure you're entering the correct Wi-Fi password if prompted.
• Update Printer Firmware: Check if there are any firmware updates available for your printer. Sometimes, updating the printer's firmware can fix connectivity issues. HP DeskJet 2752 All-in-One Printer
• Forget Wi-Fi Network: If the printer still can't connect, try forgetting the Wi-Fi network on the printer and then reconnecting to it from scratch.
• Reset Printer Network Settings: As a last resort, you can reset the printer's network settings to factory defaults. This will erase all existing network settings, including Wi-Fi networks, and you'll need to set them up again.

Refer to this document:  HP DeskJet 2752 All-in-One Printer User manual

click here and follow the troubleshooting steps- HP printer setup (Wi-Fi network)

click here and follow the troubleshooting steps  Troubleshoot a Wi-Fi connection to an HP printer 
 

I hope this helps. 

Take care and have a good day.

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution.