• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • post a message
Guidelines
We have new content about printers, Click here to check it out!
Common problems for Connectivity Issues
We would like to share some of the most frequently asked questions about Printer Wi-Fi, Connectivity Issues and Offline Status. Check out this link: HP printer is offline or unavailable.
HP Recommended
HP Officejet Pro 8600 e-All-in-One Printer - N911a

How can i connect  the printer  HP Officejet 6100 with Wireless Lan without having installation CD?

 

3 REPLIES 3
HP Recommended

Hi @solveproblems15,

 

Welcome to the HP Support Community! 

 

Thanks for reaching out about your query regarding your printer's connectivity! 

We're thrilled to have the opportunity to assist you and provide a solution.

 

Refer to this link to fix the issue: click here

 

I'm glad I could help! 😊 If this resolved your issue, please mark it as "Accepted Solution" and click "Yes" on "Was this reply helpful?"—your feedback not only keeps us going but also helps others find the solution faster! 👍

 

Take care and have an amazing day ahead! 🚀

 

Best regards,

Kuroi_Kenshi
I am an HP Employee

HP Recommended

What is to do, to connect the printer if the CD is no more available. I only would accept a solution that do not need any addionally firmware update.

I am working with compatible cartridges and do not want that HP would be going to reject such cartridges once I have followed such support.

 

I made such terrible experience with another HP printer model an I am not willing to repeat such fatal mistake

 

 

HP Recommended

Hi @solveproblems15,

 

Thank you for the response

 

Let's give these steps a try as well: 

Put Printer in Wireless Setup Mode

Turn on the printer and press the Wireless button until it starts blinking.

This enables Wi-Fi Direct or WPS Mode, depending on your router.

Connect Using WPS (If Your Router Supports It)

Press the WPS button on your router within 2 minutes of enabling Wi-Fi on the printer.

The printer should automatically connect to the network.

Check the Wi-Fi light—it should be solid (not blinking).

Find Printer’s IP Address (After Connection)

Print a Network Configuration Report by holding the Wireless button for a few seconds.

Note the IP Address from the report.

Manually Add the Printer on Windows

Go to Control Panel → Devices and Printers → Add a Printer.

Select "Add a Network Printer" and wait for your printer to appear.

If not detected, click "The printer I want isn’t listed", then select "Add a printer using TCP/IP" and enter the IP Address from Step 3.

 

Download Drivers Without Firmware Update

If Wi-Fi Direct or WPS isn't working, you can install drivers manually without firmware updates:

Go to HP's Official Driver Page:
HP Officejet 6100 Drivers

Download the "Basic Driver" (not the "Full Feature Software").

Install the driver and choose "Wireless Setup" when prompted.

This will connect the printer without forcing firmware updates.

 

I hope this helps.

 

I'm glad I could help! 😊 If this resolved your issue, please mark it as "Accepted Solution" and click "Yes" on "Was this reply helpful?" Your feedback not only keeps us going but also helps others find the solution faster! 👍

 

Take care and have an amazing day ahead! 🚀

 

Best regards,

Kuroi_Kenshi
I am an HP Employee

† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.