HP 1606dn change IP

[vlzenin]

Добрый день! Как поменять IP адрес принтера при подключении по USB кабелю?

Принтер был подключен в рабочую сеть со статическим IP. Сейчас при подключении в домашнюю сеть по ETHERNET я не вижу принтер в сети. Подключил принтер по USB кабелю. При таком подключении принтер работает. Я хочу подключить его по сети, что бы можно было печатать с телефона Samsung. На принтере в сетевом разъеме оранжевая лампочка горит, зеленая мигает.

Good afternoon! How do I change the IP address of the printer when connected via USB cable?

The printer was connected to a work network with a static IP. Now when I connect to my home network via ETHERNET, I don't see the printer on the network. Connected the printer via USB cable. With this connection, the printer works. I want to connect it over the network so that I can print from a Samsung phone. On the printer in the network connector, the orange light is on, the green one is blinking.

[ShlomiL · Accepted solution]

Hi,

Please make sure there is no ethernet cable connected to the printer and restore the factory defaults of the printer:

Now connect the Ethernet cable back and the printer should get a valid IP Address from your network's DHCP server and now check for any difference when trying to print from your phone.

Shlomi

[MarcusC]

Hey @vlzenin 🙂

Thank you for visiting our English HP Support Community. We advise you to post your question in English to insure a quick response for the Community.This can also help other users to take advantage of your post, in the case they have the same question.



Thank you for your understanding.

Regards,

MarcusC

[vlzenin]

Thank you very much!  I fixed my printer.