-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Printer Wireless, Networking & Internet
- HP Deskjet 2622 Factory Reset

Create an account on the HP Community to personalize your profile and ask a question
05-07-2024 08:36 AM
I set up this printer a few years ago and no longer have access to the username/password for the web GUI so I need to fully factory reset the device if someone could please send me the instructions do so.
Thank you.
Solved! Go to Solution.
Accepted Solutions
05-08-2024 11:11 AM
Hi @bojac19,
Welcome to the HP Support Community.
Thank you for posting your query, I will be glad to assist you.
I see that you are facing an issue with access your Printer's EWS page.
Kindly refer to the steps on this link to perform a factory reset.
Please follow the steps below to connect your printer to the network again.
1) Uninstall the HP smart app by click on this link, Restart the computer or mobile device to clear possible error conditions.
2) Enable Wi-Fi setup mode: When you turn on your printer for the first time, it is temporarily placed in Wi-Fi setup mode so that it can be discovered during setup. Use the printer control panel to restore Wi-Fi setup mode, and then set up the printer again. Go to Restore Wi-Fi setup mode on your HP printer for more information.
3) Refer to this link to use the HP smart app on your phone/tablet/PC to add a printer.
Note: Enable Bluetooth for an HP Smart app setup: Enable Bluetooth on your computer or mobile device so that HP Smart can detect the printer during the setup.
Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.
I hope this helps.
Take care and have a great day ahead!
Irwin6
HP Support
Irfan_06-Moderator
I am an HP Employee
05-08-2024 11:11 AM
Hi @bojac19,
Welcome to the HP Support Community.
Thank you for posting your query, I will be glad to assist you.
I see that you are facing an issue with access your Printer's EWS page.
Kindly refer to the steps on this link to perform a factory reset.
Please follow the steps below to connect your printer to the network again.
1) Uninstall the HP smart app by click on this link, Restart the computer or mobile device to clear possible error conditions.
2) Enable Wi-Fi setup mode: When you turn on your printer for the first time, it is temporarily placed in Wi-Fi setup mode so that it can be discovered during setup. Use the printer control panel to restore Wi-Fi setup mode, and then set up the printer again. Go to Restore Wi-Fi setup mode on your HP printer for more information.
3) Refer to this link to use the HP smart app on your phone/tablet/PC to add a printer.
Note: Enable Bluetooth for an HP Smart app setup: Enable Bluetooth on your computer or mobile device so that HP Smart can detect the printer during the setup.
Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.
I hope this helps.
Take care and have a great day ahead!
Irwin6
HP Support
Irfan_06-Moderator
I am an HP Employee