HP Envy 6340e printer

[AA-uk]

Not able to connect configure my new broadband wifi to the printer 

[BeemerBiker]

Click Spoiler if you have a new router, have not reset the printer, and nothing else changed.

Spoiler

New ISP, same old printers, PCs and smartphones: Log into the modem or router and change the SSID (names) of each band so the names are different. Create a numeric password identical for each band to simplify login. If you must use alphanumeric characters then do not use any from this set: ilL1oO0D8B5S as they are easily mixed up depending on the font used. Be sure to run the application (if any) that finds the best channel for each band. Your ISP should be able to do all of this for you if you need help.

If you configure the new router with:

• The same SSID (network name) as the old router
• The same Wi-Fi password
• The same security type (typically WPA2-Personal or WPA2/WPA3 mixed mode)

Your printer may reconnect automatically. However, your PC may have an old IP address, but you can always tell the PC to find the printer, and it will obtain the new IP address.

 If you do not remember the old SSID or password then

1 - Use a different SSID for the 2.4ghz band
2 - Use the same numeric password for each band

You may need to reset the printer: Click here

Wi-Fi setup to router: video here

alternately Simple push button or WPS setup is described on page 28 of User Manual

This needs to be done if you have an ink subscription or signed up for the "plus" features.

For Wi-Fi direct setup click here.

USB could also be used.

Full feature software 6432e April 2024
InkJet Reference 6432

If you have multiple repeaters or Wi-Fi boosters or 2.4ghz cameras / appliances, there are additional settings required.