HP MFP135w Wireless Connection Issue using WiFi Repeater

[Tekkie123]

Hi,

I recently purchased HP MFP135w LaserJet Printer. 

The issue I'm facing is that when I am connecting it through Wi-Fi Repeater, it's not connecting.

I have placed the printer on second floor of my house where I don't get the main Wi-Fi Router signals for which I have in place Xiaomi Wi-Fi Repeater. Can someone help. Thx

[Tekkie123]

Just to add, I have kept same name of Repeater SSID as that of main Wi-Fi Router but still when I place Printer in Wi-Fi Repeater coverage, the printer says no Signals.

Note that Printer is working fine wirelessly when placed in main Wi-Fi Router coverage area.

[Betty0610]

@Tekkie123

Welcome to the HP Support Community.

The router is probably not configured in the bridge mode. This could be a NAT issue which means multiple routers are handing out IP addresses and causing a conflict. Bridge mode means the router acts as purely an access point and not a router. The issue is most likely when you can print at a specific location but not at a different location. Do check the mode.

Let me know if this helps.

If the information I've provided was helpful, give us some reinforcement by clicking the "Accept as solution" button, that'll help us and others see that we've got the answers!

Thanks!

Have a great day!