How to change from current network to a different one

[Tim-ster1]

Hp 2700 moved to New location and a new Wi-Fi. How to connect to new network? 

[BeemerBiker]

General help for new router, but just watch the reset video and decide if you want to connect to the router or use Wi-Fi direct and bypass the router.

1 - Restore Wi-Fi setup mode on your HP printer
2 - Wi-Fi connection is lost after router or network settings change
3 - HP Smart help with printer connection.

If English is not your native language or if you wish to get additional information not covered below, then use the HP and Microsoft support assistants. The latest HPSA supports 36 languages and can be downloaded here. Microsoft's AI assistant is in the latest Windows 10 and 11 releases and there are instructions here on how to enable the AI. Microsoft's AI assistant (Copilot) has a microphone button and supports natural language processing.

You may need to reset your printer.

Disconnecting the USB cable may still leave the printer in the wired or Wi-Fi mode. Connecting an ethernet cable may still leave the printer in Wi-Fi mode. The Wi-Fi reset is used to put Wi-Fi printers into setup mode. Some printers have a semi-reset, a full reset and a factory reset. Please refer to the user manual to find the difference. Some resets are simple and others require a video to understand. Factory resets cannot be revealed in this forum. To do a factory reset of your printer, you must contact HP.

Click here for world-wide contact info

Wi-Fi reset instructions and videos (if any) are shown below. Generally you have 2 hours to connect your printer after performing the Wi-Fi reset. Note that a reset video may show a slightly different model than yours.

Watch this video to see how to reset your printer: 2700.
Microsoft's Copilot may have more recent videos.

Wi-Fi connection

Ideally, your Wi-Fi printer should connect to the modem or router. If your network has multiple boosters / repeaters, it is possible the printer may connect randomly to any of the units. The router needs to provide the same IP address on every connection. This rarely happens with random connects. An alternate Wi-Fi connection is Wi-Fi direct. Your laptop or smartphone prints directly to the printer and does not go through the router.

This video shows how to connect to the router: 2700 2755 2710
Wi-Fi Direct can be used to avoid configuring the router. Watch this: 2700
A simple connection to the router can be done by using the WPS pushbutton method. This is explained on page 22 in this User Manual.

Software

HP updates software periodically. Downloads shown below may be old. You should always visit the Software and Download page to look for new releases. You may need to select an operating system (OS) first. If windows 11 is missing then use 10. You can go as far back as Windows 7, 64bit to get missing drivers. After selecting the OS click the blue Open all button to view all downloads.

Full function printer drivers can be downloaded here: 2700
You can find all of the software here: 2700 series. You should select the OS and then look for the phrase "Open All" and click that. Drivers from Windows 7 and up are usually compatible with the latest Windows OS.

Documents

All documents are available at the below HP site. The user and reference manuals show how to get status reports and analyze error indicators on printer that have no control panel.

All HP manuals are here: 2700 series

Support Videos - Parts - Disassembly

HP has a YouTube site and there are a number of video in English and other languages. Typically unboxing, clearing paper jams, and cartridge problems. You may also find instructional disassembly videos from other users.

Printer problems could be cleared by one or more of these HP YouTube videos 2700

Printer Reference

One or more printer reference is listed below. Typically your printer may be part of a series and use the same software and manual. The exact spec may be different.

Specifications for your system: 2700 2710 2755 2732

The printer supports both the 2.4ghz and the 5ghz band.
You may want to force the printer to use only one band. This can prevent it from getting a different IP address depending on the band it connects to. Watch this video to see how to set the band.

2700 2710 2732 2755

Let me know if you have a flex system (Wi-Fi boosters or repeaters) as the setup is much more complicated when using the router type of connection.