LaserJet m15w - changing Wifi

[jrwusch]

I recently switched Wifi, and now I can't connect my LaserJet to the new Wifi. Please help.

Thank you!

[Raj_05]

Hi @jrwusch,

Welcome to HP Support Community.

Thank you for posting your query, I will be glad to help you.

To connect your HP LaserJet Pro M15w printer to a new Wi-Fi network, you can follow these steps.

1. Make sure your printer is in setup mode:

   • Turn on the printer.
   • Press and hold the Cancel (X) button for about 5 seconds until the Attention light blinks.

2. Connect the printer to Wi-Fi:

   • On your computer or mobile device, go to the Wi-Fi settings.
   • Look for a network name that starts with "HP-Setup" followed by a series of numbers and letters. Connect to this network.

3. Access the printer's embedded web server:

   • Open a web browser (e.g., Chrome, Firefox, or Safari) on your computer or mobile device.
   • In the address bar, enter the following: http://192.168.223.1/ and press Enter.

4. Configure Wi-Fi settings:

   • You should now be on the printer's web interface. Click on "Network" or "Wireless" (the wording may vary depending on your printer's firmware).
   • Select "Wireless Setup Wizard" or a similar option.
   • Follow the on-screen instructions to select your new Wi-Fi network and enter the Wi-Fi password. Make sure to double-check the information for accuracy.

5. Complete the setup:

   • After entering your new Wi-Fi credentials, the printer will attempt to connect to the new network. Once it's successfully connected, the printer's web interface may show a message indicating that it's connected.

6. Return to your regular Wi-Fi network:

   • Go back to your computer or mobile device's Wi-Fi settings and reconnect to your normal Wi-Fi network (the one you want the printer to be on).

7. Test the connection:

   • After connecting your computer or mobile device to the correct Wi-Fi network, try printing a test page to ensure that the printer is working correctly on the new network.

Your HP LaserJet Pro M15w printer should now be successfully connected to your new Wi-Fi network.

I hope this helps.

Take care and have a good day.

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

Alden4
HP Support