New HP2700 Printer stopped printing

[Penguin99]

I replaced the ink cartridges for the first time and now the printer will not print.  It sounds like it is printing, however nothing is printed on the paper.  Print doctor says everything is fine.  Anyone else ever had this issue?

Thank you

[TEJ1602]

@Penguin99, Welcome to HP Support Community!

Are you able to make photocopies on the printer?

If no, follow the steps from the document  Black Ink Not Printing, Other Print Quality Issues to isolate and resolve the issue.

Also, Update the printer firmware

Download available firmware updates from the HP website

With the printer on and connected to the computer, go to HP Customer Support - Software and Driver Downloads, and then identify your printer. Look for and install any available firmware updates. Refer to the document HP Printers - Updating or Upgrading Printer Firmware

If yes, follow the steps below-

I recommend you delete the driver and root level and retry, follow the steps below: 

1) In Windows, search for and open Programs and features 

2) Select your HP Printer 

3) Select Uninstall 

4) In Windows, search for and open Devices and printers 

5) In the Devices and Printers windows look for your HP printer. If you see it listed right-click on it and choose ‘Delete’ or ‘Remove Device’ 

6) Open up the run command with the “Windows key + R” key combo. 

7) Type printui.exe /s and click Ok. (Note: there is a space in between “printui.exe”

😎 Click on the “Drivers” tab 

9) Look for HP Printer driver. If you see it Click on it and click Remove at the bottom 

10) Select Ok 

11) Select Apply and Ok on the Print Server Properties windows 

12) Close Devices and Printers.

Use this link to download and install the new driver. Configure the printer and try printing.

Hope this helps! Keep me posted. 

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!