To reset the EWS (Embedded Web Server) password for your HP Desk Jet 2633

[Toftman]

To reset the EWS (Embedded Web Server) password for your HP DeskJet 2633 All-in-One Printer, 

[Sneha_01]

Hi @Toftman,

Welcome to HP Support Community.

Thank you for posting your query, I will be glad to help you.

To reset the Embedded Web Server (EWS) password for your HP DeskJet 2633 All-in-One Printer, you can follow these general steps:

Factory Reset the Printer:

• Turn on the printer if it is not already on.
• On the printer's control panel, press and hold the "Cancel" button (X) and the "Wireless" button simultaneously for about five seconds or until the power light blinks.

Reconfigure Network Settings:

• After the reset, you will need to reconnect the printer to your wireless network. Use the HP Smart app or the printer software to set up the wireless connection again.

Access the EWS:

• Once the printer is connected to your network, find its IP address. You can usually print a network configuration page from the printer's control panel.
• Enter the printer’s IP address into a web browser to access the EWS.

Set a New Password:

• Navigate to the "Network" or "Wireless" settings tab within the EWS.
• Look for an option related to security settings or admin password.
• Set a new password and save the changes.

I hope this helps.

Take care and have a good day.

Please mark this post as “Accepted Solution” if the issue is resolved and if you feel this reply was helpful click “Yes”.

Rachel571

HP Support