Wi-Fi Config from HP P1102W

[Gman177]

After two torturous days and painstakingly searching for answers, I have finally solved my problem with the wi-fi connection to my HP P1102W Wireless configuration on my Windows 11 computer. The Driver for Windows 10  works on Win 11! 

1. If you already have a previous wireless connection please follow these steps before trying the install.

This is the error I was getting for 2 days:

The printer was able to successfully connect to the wireless network using the wireless credentials provided. However, this computer is unable to communicate with the printer.

Please verify that the printer is on the same network as this computer and, if using WEP, verify that the credentials were entered correctly and try again.

The SOLUTION IS TO perform a Restore the factory-set default settings FIRST
Follow these steps to restore the product's factory default settings. These steps do not reset page counts, service IDs, or other static product values.

CAUTION:These steps will reset the product's current wireless settings to factory-set default settings. Any custom settings will be lost, and you will need to reconfigure the product's wireless settings.
Press the Power button ( ) to turn off the product.
Press the Power button ( ) to turn on the product.
The product begins to initialize.
While the product initializes, press and hold the Cancel button ( ) and the Wireless button ( ) for 10 to 15 seconds, and then release both buttons.

NOTE:LED lights blink until both buttons are released.
The factory default settings are restored.

Now Download software from HP - https://support.hp.com/us-en/drivers/hp-laserjet-p1100-printer-series/model/4110306

2. Follow the prompts for USB connection. I know, using a cable is odd for a Wireless connection, but it works. 
3. PROBLEM SOLVED. 

KUDOS to Pcwizard from HP. This solution worked