WiFi set up on printer

[Snow33]

I am trying to set up my printer to WiFi 

[Max3Aj]

Hello @Snow33, and welcome to the HP Support Community!

Thanks for posting your question.

I'd be happy to help you set up your HP printer on Wi-Fi. Please follow these steps to get connected:

Option 1: Using HP Smart App (Recommended)

Download the HP Smart app:

• HP Smart

Open the app and click “Set up a new printer.”

Turn on your printer and make sure it’s in Wi-Fi setup mode:

• If it’s new or recently reset, it should enter setup mode automatically.
• If not, restore network settings:
  • On most HP printers: Press and hold the Wireless button and Cancel button together until the wireless light blinks.

The app will detect your printer and guide you through connecting it to your Wi-Fi network.

Option 2: Using Printer Control Panel (for models with display)

• On the printer’s screen, go to Settings > Network Setup > Wireless Settings.
• Select Wireless Setup Wizard.
• Choose your Wi-Fi network from the list and enter the password.

Option 3: WPS (Wi-Fi Protected Setup)

If your router supports WPS:

1. Press the WPS button on your router.
2. Within 2 minutes, press and hold the Wireless button on your printer until the light starts blinking.
3. The printer should connect automatically.

Troubleshooting Tips

• Make sure your Wi-Fi is 2.4 GHz or 5 GHz, also some HP printers don’t support 5 GHz.
• Keep the printer close to the router during setup.
• If setup fails, try restarting your printer and router.

I hope the information shared has been useful and resolves your concern.

Wishing you a smooth and hassle-free experience ahead!

If this solution helped, please click “Accepted Solution” so others can benefit too. Don’t forget to hit the “Yes” button if you found this helpful!

Warm regards,

Max3Aj

HP Support