WiFi set up

[Maricella19]

I can’t get my desk jet 2548 to connect to wifi. I’ve tried to set up multiple times. I “rebooted” the wifi setup 3x already. The “!” Is blinking and I don’t know why 

[Elohi_NR]

Hi @Maricella19,

Welcome to the HP Support Community. 

Do not worry, I'd be happy to help you! 

I understand that you are facing issues with connectivity. 

Make sure, your printer and your device are on the same network as 2.4GHZ only. 

Is it a private (Home network) or a public Wi-Fi connection? Wi-Fi direct? Or Hotspot?
What device are you using the printer with a Windows computer, Mac, Android, or iPhone?

On the printer's control panel, press the Wireless button and the Information button at the same time.

Both a Wireless Network Test Report and a Network Configuration Page print.

Check if wireless ON and wireless working say PASS.

Restart the wireless router, the printer, and the PC

Use WPS to connect the printer to your wireless network.

Locate the WPS button on your router, but do not press it yet.

If your router does not support WPS, skip to the next step to connect the printer with the HP Smart app.

Turn on the printer. If the printer is in sleep mode, press the Cancel button on the control panel.

On the printer control panel, press and hold the Wireless button for at least 3 seconds or until the wireless light starts to flash.

On the router, press and hold the WPS button for 3 to 5 seconds or until it shows that the WPS connection process has started.

NOTE: The printer stops searching for a WPS connection two minutes after the wireless button is pressed. If you were unable to press the WPS button within that timeframe, attempt these steps again.

Once the printer connects to the wireless network, the blue Wireless light on the control panel turns on solid.

Hope this helps! Keep me posted. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!