Wifi Problem when i connect HP Envy 6030 Printer

[ahmedalameldeen]

I have HP Envy 6030 Smart Printer and i made the setup on my wifi, but whenever the printer is On, apparently an IP conflict happens, and the Wifi of my home router that is connected to the printer, is shutdown and Wifi network becomes not available

[KrazyToad · Accepted solution]

@ahmedalameldeen

Welcome to HP Community

I have gone through your Post and would like to help

Please download and run the HP Print And Scan Doctor from this Link: ftp://ftp.hp.com/pub/printers/hppsdr/patches/HPPSdr.exe

Run PSDR v5.0.2 

Once the PSDR detects the Printer, it will show up the IP address and Software Status. 

Select the correct Printer and click on Next. 

PSDR will check if the Printer is on the Network and communication between the PC and the Printer. Once the connection check is done, click on Fix Printing 

Once PSDR goes through all checks and automatic fixes, click on Print a test page. 

Regardless if PSDR printed the test page or not, click on “NO PRINT” 

PSDR will then notify you that there is an update available, click on continue, and PSDR will apply the patch and ask for a reboot. 

Post restart the PSDR will run automatically to check for more issue.  If no issue found close PSDR. 

If the information I've provided was helpful, give us some reinforcement by clicking the "Solution Accepted" on this Post and it will also help other community members with similar issue.
 

[ahmedalameldeen]

Thanks a lot @Krazy

[KrazyToad]

Drop us a message anytime you need help 😊