Wifi light not blinking

[oz007]

When trying to connect my Wifi printer to my router, I pressed both Cancel and Wireless Connection button at the same time, but Wireless light is not blinking as expected.
Please, can you lend me a hand?

[Max3Aj]

Hi @oz007, Welcome to HP Support Community. 

Thank you for posting your query, I will be glad to help you. 

If your HP Ink Tank Wireless 410 printer's Wireless light is not blinking after pressing Cancel + Wireless button, try these steps:

Reset the Wireless Settings

1. Turn on the printer.
2. Press and hold the Wireless button (🛜) and the Cancel button (❌) together for 5 seconds.
3. The Wireless light should start blinking, indicating the printer is in setup mode.

Restart the Printer & Router

1. Turn off the printer and unplug it from power for 1 minute.
2. Restart your Wi-Fi router by unplugging it for 30 seconds, then turning it back on.
3. Turn on the printer and check if the wireless light blinks.

Use HP Smart App for Setup

If the wireless light is still not blinking:

1. Download and install the HP Smart App from the Microsoft Store.
2. Open HP Smart and click Add Printer.
3. Follow the on-screen instructions to connect the printer to Wi-Fi.

Restore Network Defaults (Alternate Method)

1. Press and hold the Wireless button for 5-10 seconds until the light starts blinking.
2. Now, try connecting the printer again via HP Smart.

We're thrilled to have the opportunity to assist you and provide a solution. We hope our assistance has been helpful!

Take care, and have an amazing day!
 

Did we resolve the issue? If yes, Please consider marking this post as "Accepted Solution" and click "Yes" to give us a helpful vote - your feedback keeps us going!

Regards,

Max3Aj