cancel
Showing results for 
Search instead for 
Did you mean: 
Common problems for Connectivity Issues
We would like to share some of the most frequently asked questions about Printer Wi-Fi, Connectivity Issues and Offline Status. Check out this link: Printer Wi-Fi, Connectivity Issues and Offline Status..
Chechak
New member
1 0 0 0
Message 1 of 2
124
Flag Post

Wireless connection

HP Recommended
HP DeskJet 3755
iOS

Installed new T-Mobile gateway but can’t transition my printer to the new wifi

1 REPLY 1
Jay_G24
HP Support Agent
HP Support Agent
14,197 14,163 1,160 1,279
Message 2 of 2
Flag Post
HP Recommended

Hi @Chechak,

 

I'd like to help!

 

I understand you are uanble to connect the pinter to your new Wi-Fi

 

To assist better -

  1. What is the status of the wireless light on the printer, steady or blinking?
  2.  I would like to know, is your router set to work on 2.4 GHz network or 5 GHz network band?

Meanwhile, you may try the below steps-

 

Press the Wireless button ((i)) and the Cancel button (X) from the printer control panel at the same time, and then hold them for three seconds.

 

--->On the printer control panel, press the Wi-Fi Direct button.

---> When Wi-Fi Direct is turned on, the Wi-Fi Direct light is on steady. 

--->To find the Wi-Fi Direct name and password, press the Information button (i) for 3 secs to print a printer information page.

--->On your computer or phone go to wifi and connect it to your printer 

--->Select your printer with DIRECT in the name from the list of available networks (example: DIRECT-74-HP 3700)

Or 3600

--->Select the Wi-Fi Direct printer signal in Wi-Fi settings 

--->If prompted for a password, type 12345678. This is the default password.

--->Now open a browser and type 192.168.223.1

--->you will be able to access the printer's EWS page 

--->on the page, you will find network - click on it 

--->go to wireless and select wireless setup wizard

--->now select the network that you want your printer to connect to and type in the password 

--->the wireless blue light will stop blinking once the printer is connected 

--->then connect your phone back to your network

 

You may also refer to - No Connection after Router or Wi-Fi Settings Change

 

Hope this helps! Keep me posted. 

 

And, Welcome to the HP Support Community. 

 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping

Was this reply helpful? Yes No
Warning Be alert for scammers posting fake support phone numbers and/or email addresses on the community. If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation