Wireless to Wired Connection

[RsaMjrJohn]

I have come to ABSOLUTELY HATE wireless connection printing.  How do I connect my printer with Direct connection printing

[Max3Aj]

@RsaMjrJohn, Hello and welcome to the HP Support Community!

Thanks for posting your question. I'm here to help you get things back on track.

I completely understand your frustration with wireless printing, thank you for reaching out. If you'd prefer a direct USB connection for your HP LaserJet MFP M139we, here’s how you can set it up:

Disconnect Wireless Settings (Optional but Recommended):

• On the printer control panel, reset the network settings to avoid interference:
  • Press and hold the Wireless and Cancel buttons together for 5 seconds until the printer restarts.

Connect the USB Cable:

• Plug a USB A-B cable (standard printer cable) from your printer to your PC.
• If you don’t have one, you can purchase it online or from a local electronics store.

Download and Install the USB Driver:

• Visit the official HP driver page: Official HP® Support
• Download the Full Software Solution or Basic Drivers for USB setup.

Run the Installer:

• During installation, choose USB connection when prompted.
• Follow the on-screen instructions to complete setup.

Disable HP Smart (Optional):

• If you’re not using HP Smart or HP+, you can skip signing in or registering.
• For HP+ printers, some features may still require HP Smart for full functionality.

I hope the information shared has been useful and resolves your concern.

Wishing you a smooth and hassle-free experience ahead!

If this solution helped, please click “Accepted Solution” so others can benefit too. Don’t forget to hit the “Yes” button if you found this helpful!

Warm regards,

Max3Aj

HP Support