Wrong IP address

[sl52-_]

My printer has the wrong IP address and I don't know how to change it 

[Raj_05]

Hi @sl52-_,

Welcome to HP Support Community.  

Thank you for posting your query, I will be glad to help you.

To change the IP address of your HP OfficeJet Pro 9015 All-In-One Printer, you can follow these general steps. Keep in mind that specific instructions may vary slightly depending on your printer model and the network configuration.

Access the Printer's Web Interface:

• Open a web browser on a computer connected to the same network as the printer.
• Enter the current IP address of the printer in the browser's address bar and press Enter.

Login to the Printer's Web Interface:

• If prompted, log in with your printer's username and password. If you haven't set up a username and password, you might be able to access the settings without entering any credentials.

Navigate to Network Settings:

• Look for a section related to network or connectivity settings. The exact location of these settings may vary based on your printer model.

Change the IP Address:

• Locate the option to change the IP address or TCP/IP settings. This might be under a "Network," "Wireless," or "Advanced Settings" menu.
• Change the IP address to the desired one.

Save the Changes:

• After entering the new IP address, there should be an option to save or apply the changes. Click on that option.

Restart the Printer:

• Once you've changed the IP address, it's a good idea to restart the printer. This helps apply the new settings.

Verify the Changes:

• After the printer restarts, check if the new IP address has been applied. You can do this by printing a network configuration or status page from the printer.

Remember that it's essential to use a valid IP address within your network's range to ensure proper connectivity. If you encounter any issues or if the steps mentioned above don't match your printer's interface, refer to your printer's user manual.

I hope this helps. 
 

Take care and have a good day.

Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

Alden4
HP Support