-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Printers
- Printer Wireless, Networking & Internet
- automatic ignition in AirPrint

Create an account on the HP Community to personalize your profile and ask a question
04-15-2024 04:07 AM
Hi @Nessim,
Welcome to the HP Support Community.
I'd be happy to help you!
Yes, you can set up your HP Smart Tank 7005 printer to automatically turn on when you send an AirPrint job from your Mac. Here's how you can do it:
Ensure Printer is Connected: Make sure your printer is connected to the same Wi-Fi network as your Mac.
Enable Wake-On-Wireless: On the printer's control panel, navigate to the wireless settings and look for an option called "Wake-On-Wireless" or something similar. Enable this feature. This setting allows the printer to wake up from sleep mode when it receives a print job over the wireless network.
Set Printer to Sleep Mode: Set your printer to go into sleep mode after a certain period of inactivity. This setting is usually found in the printer's control panel under the power or energy-saving settings.
Test the Setup: Send a test print from your Mac to the printer. If everything is set up correctly, the printer should wake up from sleep mode and print the document.
Keep in mind that the exact steps may vary slightly depending on the printer model and the version of macOS you're using. If you need more specific instructions, you can refer to the printer's user manual. Click here
Hope this helps! Keep me posted for further assistance.
Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!
Nal_NR-Moderator
I am an HP Employee
04-15-2024 05:12 AM
Hello Elohi_NR
I have followed all your advice, but on my hp smart tank 7005 printer, there is nothing I can do with the control panel.
I have used the HP SMART application on my computer, but it is impossible to activate the automatic switching on of my printer.
I also get an error message when I try to update the firmware (error system).
Thank you for your help
04-15-2024 10:30 AM
Hi @Nessim,
We apologize for the inconvenience, but it seems that the issue persists even after attempting the troubleshooting steps mentioned above.
Unfortunately, there are no further actions we can take through this channel. I recommend reaching out to our phone support for further assistance.
This might require one-on-one interaction to fix the issue via remote assistance.
I've sent you a private message with further instructions. In order to access your private messages, click the private message icon on the upper right corner of your HP Support Community profile, next to your profile Name or simply click on this link.
If the information I've provided was helpful, give us some reinforcement by clicking the Accepted Solution button, that'll help us and others see that we've got the answers!
Nal_NR-Moderator
I am an HP Employee