i can't conect my printer but it connected for 3 months now the wifi had a repair it is not connect

[vihan3]

HP Deskjet ink advantage  Ultra 4929 ink pin:93919652

[VikramTheGreat]

Hi @vihan3,

Welcome to the HP Support Community.
 

Thank you for posting your query. I will be glad to help you.

Since your HP DeskJet Ink Advantage Ultra 4929 was working fine for months and stopped connecting after a Wi-Fi repair, it’s likely a network configuration issue rather than a printer fault. Let’s fix it step-by-step:

 1. Restore Network Settings on the Printer

This will clear old Wi-Fi info:

• Press and hold the Wireless and Cancel buttons together for 5 seconds.
• The printer will reset its network settings and enter setup mode (Wi-Fi light should blink).

2. Reconnect Using HP Smart App

1. Download or open the HP App – For HP Printers, Laptops, and Tech Accessories | HP® Official Site.
2. Click “Set up a new printer”.
3. The app should detect your printer in setup mode.
4. Select your Wi-Fi network and enter the password.
5. Complete the setup and print a test page.

3. Use WPS (If Your Router Supports It)

1. Press the WPS button on your router.
2. Within 2 minutes, press the Wireless button on your printer.
3. Wait for the Wi-Fi light to stop blinking. This means it’s connected.

4. Add Printer Manually (If Not Detected)

1. Print a Network Configuration Page from the printer.
2. Note the IP address.
3. On your PC, go to Control Panel > Devices and Printers > Add Printer.
4. Choose “Add a printer using TCP/IP address” and enter the IP.

I hope this helps.

Take care and have an amazing day!
 

Did we resolve the issue? If yes, please consider marking this post as "Accepted Solution" and click "Yes" to give us a helpful vote - your feedback keeps us going!

Regards,

VikramTheGreat