need to connect to a new wifi network

[jasonsalamah]

i need to connect my hp deskjet 2700 to a new wifi network

[zoey7886]

@jasonsalamah, Welcome to the HP Support Community!  

Thanks for reaching out about your query regarding Your HP DeskJet 2700 Printer to a New WiFi Network! 

We're thrilled to have the opportunity to assist you and provide a solution.  

To connect your HP DeskJet 2700 printer to a new WiFi network, you can use either the HP app or the Wi-Fi Protected Setup (WPS) method. Here is a step-by-step guide on how to do it:

Using the HP App

Prepare for Installation:

• Ensure your computer or mobile device is connected to the new WiFi network and is powered on.
• Make sure your printer is turned on and is near your computer or mobile device.

Connect with the HP App:

Android Device:

• Enable Bluetooth on your device.
• Download the HP app from 123.hp.com.
• Press the Cancel and Wireless buttons on the printer for 3 seconds, then release. The printer enters setup mode.
• Open the HP app, click "Add Printer," and select your printer. Follow the prompts to enter your WiFi password.
• The wireless light on the printer will turn solid blue once connected.

iOS Device:

• Enable Bluetooth on your device.
• Download the HP app from 123.hp.com.
• Press the Cancel and Wireless buttons on the printer for 3 seconds, then release. The printer enters setup mode.
• Open the HP app and tap "Add Printer." Select your printer and follow the on-screen instructions to connect.
• The wireless light on the printer will turn solid blue once connected.

Windows:

• Turn on the printer.
• Download and install HP Smart from the Microsoft store.
• Press the Cancel and Wireless buttons on the printer for 3 seconds, then release. The printer enters setup mode.
• Open HP Smart, click the Plus sign, select your printer, and follow the prompts to enter your WiFi password.
• The wireless light on the printer will turn solid blue once connected.

Hope this helps! 

Take care, and have an amazing day!  

Did we resolve the issue? If yes, Please consider marking this post as "Accepted Solution" and click "Yes" to give us a helpful vote - your feedback keeps us going!  

Regards,