cancel
Showing results for 
Search instead for 
Did you mean: 
ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
Conrad123
Level 2
27 13 0 0
Message 1 of 2
947
Flag Post

HP DesignJet T1200ps initializing too long

HP Recommended
HP DesignJet T1200ps

Hi,

this machine is taking too long as if it will never end on initializing, waited for about an hour but seems to hang on that state of initializing, no movements on the components. tried replacing the almost empty MK cartridge and tried doing the hard disk recovery and the file system check, but still the problem occur. any advice on this problem? Thanks!

0 Kudos
1 REPLY 1
davidzuts
Level 13
7,130 7,121 558 1,025
Message 2 of 2
Flag Post
HP Recommended

Remove media if loaded and remove all ink cartridges and printheads and then start the printer and see if it gets where it wants you to load items and if so do the first item and continue.

ArchivedThis topic has been archived. Information and links in this thread may no longer be available or relevant. If you have a question create a new topic by clicking here and select the appropriate board.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation