-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Archived Topics
- Printers Archive
- HP Deskjet 3630 won't print black

Create an account on the HP Community to personalize your profile and ask a question

09-04-2016 02:27 PM
Hello,
I have HP Deskjet 3630 and I changed the black cartrige (original, software even congratulated me for using the original ink) and everything was fine. However, I haven't used the printer for ~2 months and now it won't print black text even the software is showing that ink level is almost full. Color printing is going fine.
Please help me fix this issue.
Thank you in advance.
09-04-2016 08:57 PM
Perform the print cartridge cleaning procedure 4-5 times. Then try here.
Let us know.
09-05-2016 11:42 AM
It doesen't help. I tried all that. For example when I press copy in black it just pull the paper and spit it out. But when I press copy in color then colors appear on the paper but without black.
Here's cartridges level:
09-05-2016 12:43 PM
Try these Youtube videos here.
https://www.youtube.com/results?search_query=Deskjet+3630+print+head
Search for more if needed for help.
06-20-2017 05:09 AM
It doesen't help. I tried all that. For example when I press copy in black it just pull the paper and spit it out. But when I press copy in color then colors appear on the paper but without black. I have put new ink catriage.
09-08-2017 11:48 AM
I had the same problem.
Did not use my printer for 2 months and put a new HP63XL cartridge (sealed in the aluminim wrapper and store in my drawer for 2 months)...the color cartidge was working fine.
I tried all the steps, tried the copy function (to skip the computer just in case it was due to the computer..) same!
I cleaned the black ink cartridge with a q tip and isopropyl alcohol, let it dry and put it back in place.
You need to clean the bottom part, where the ink comes out (not the part were you see the little dots)
Use only a q tip and alcohol, do not put your finger tips on it.
After that I run the copier 3 times....I could see the black ink coming back gradually in thin lines.
after a couple of copies i t worked!! Then I printed from my computer and it worked!
GOOD LUCK!
ps: I was very upset not to be able to get in touch with HP because my printer was more than a year old (bought in 05/2016)...very upset to have to throw something which in fact works just because nobody can answer your question!!! this is such a society of waste and pollution!! I hope I helped you!
