HP Officejet Pro 8610 4X6 Borderless Printing

[Admiral_Cecil]

Hello,

I have an HP Officejet Pro 8610 on Windows 7 x64.  It says 4x6 photo paper is supported.  But, when I tried to print to this size, the 8610 refuses to pickup the paper.  I've tried all the 4x6 HP photo paper settings, but still no go.

Is 4x6" photo paper not supported?  Or, how do I get it to print at this size?

[jabzi]

Hello, 

Please click HERE to access steps that should resolve the issue.

If issue still persists, please call HP Tech Support for further assistance.

If you are in US , the toll free # is 1-800-474-6836 .

If you are not in US , then log on to www.hp.com , at bottom-left corner there is a world map icon, click on it and then select the region you belong to, which would then provide support options for you for that region.

[Admiral_Cecil]

Hello,

Yes, I followed all those instructions earlier before I posted on the forum.  But, it did not help as the printer refused to pickup the 4x6 photo paper.

[jabzi]

Hello, 

Could you please try to place the glossy side of the photo paper facing down in the tray and check if it pulls in the paper.

[Admiral_Cecil]

Hello,

Yes the glossy side is facing down, but the paper won't get drawn in.

[jabzi]

Hello, 

Please click HERE to access the steps that should resolve the issue.

You may have to try Solution Three .

. If issue still persists, please call HP Tech Support for further assistance.

If you are in US , the toll free # is 1-800-474-6836 .

If you are not in US , then log on to www.hp.com , at bottom-left corner there is a world map icon, click on it and then select the region you belong to, which would then provide support options for you for that region.

[BreadPigZ2]

Hi there,

there are 3 things to note when printing photo media on this printer:

1) Software selection

2) stack height of photo media (there is a sticker indicating the maximum stack height of photo media in the paper tray)

3) width adjustor. as you are printing to 4x6 photo media, do ensure the 2 width adjustors and 1 front adjustor of the paper tray are adjusted to the correct size.

Last but not least, ensure the paper tray is inserted fully, there will be a 'Click' sound when the installation is correct

http://support.hp.com/us-en/document/c04117836

Solution 2> Step 2

Hope this helps.

[MB1130]

why does HP make this post card printing so stupid difficult, used to be about a 2 step process...not worth the trouble, wish I had not bought the 8610 Pro

[JanP60]

Need assistance on 4x6 borderless printing on HP9=8610 all-in-one. How/where to feed paper.

[jabzi]

Hello,

Please click HERE to access the steps that should resolve the issue .