-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center. -
- HP Community
- Archived Topics
- Printers Archive
- ePrint with HP Laserjet P1102W

Create an account on the HP Community to personalize your profile and ask a question

04-11-2012 07:22 AM
Hello, I just follow the instruction on how to enable ePrint on my HP LJP1102W.
I downloaded the latest firmware datecode:20120130, went to the HP Web Services TAB, and hit enable.
The message: "A Web Services information sheet will be printed. Review the sheet for important information." appears on the screen and hit OK.
But nothing print out and no errors reported.
HELP, what should I do next?
Solved! Go to Solution.
Accepted Solutions
12-11-2013 02:09 PM
Thanks. After spending literally 8-10 hours trying to resolve it, i finally did what i should have done and went to HP Connected and chatted to tech support. The issue was the frmware on the printer needed to be updated, which they helped me do.
Took 5-10 minutes, then all working. Added other staffs chromebooks for Cloud Print, and love it.
Have gone out today and bought two more. This time i wont waste time, will just upgrade the firmware and be done with it.
I actually tried that prior to going to tech support, but didnt realise i need to have the printer plugged into pc with usb when i did it 🙂
Thanks HP, support was good.
04-18-2012
11:34 AM
- last edited on
10-06-2015
05:13 PM
by
Omar-E
Hi,
I'm assuming you followed all the instructions at this page?
http://h30434.www3.hp.com/t5/user/viewprofilepage/user-id/2585903
From the printer's EWS web page where you set up ePrint (the HP web services tab) you should see a button that says "Print Information Sheet" if the e-Print center registration completed successfully. You might try clicking it to see if the page you need will print. That page will have an ID number that you use to register your printer with ePrint Center
Thanks!
Opinions expressed are mine and do not necessarily reflect the opinions of HP.
Reminder: Please select the Accept as Solution button on the post that best answers your question. Also, you may select the Kudos button on any helpful post to give that person a quick thanks.
04-19-2012 05:04 PM
Hi,
When you click on Enable, does it show "Connecting"? After that, does it show "Connection Error"?
Thanks!
Opinions expressed are mine and do not necessarily reflect the opinions of HP.
Reminder: Please select the Accept as Solution button on the post that best answers your question. Also, you may select the Kudos button on any helpful post to give that person a quick thanks.
07-06-2012 01:36 AM
Any resolution to the enabling webservices issue? (HP P1102W, printing happily on local wireless network. Try and enable web services via web configuration, results in a fail message " Connection error. Check Internet connection." message.) Therefore, cannot use/access HP ePrint service.
01-12-2013 10:03 AM
Hey,
I am having the exact same problem with the Laserjet P1102w and eprint. Printing from wlan or printing the configuration page from the webpage works, but trying to activate eprint just prompts a message that a page is being printed. Nothing happens, though.
Has anyone found a solution?
Greetings
12-09-2013 09:40 AM
i cannot enable web services. everytime i try, i getan erro message saying connection error, check internet.
however there is nothing wrong with internet at either computer or printer.
this is beginning to get very annoying.
