error code. 01.1 10.

[RANO1]

error code. 01.1 10.

System Error:
01.1: YZ
Problem Description:
Error in the Print Mech PCA.
Corrective Action:
Try the following:
􀂄Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power on the Printer.
Continues 􀂄If the System Error, replace the Main PCA ⇒ Page 6-161.
Continues 􀂄If the System Error, replace the Formatter ⇒ Page 6-159.

 

 NOT STARTED THE PLOTTER (44 OR 24 ")

 

We have another plotter 24 "from which we have extracted and changed the main PCA and Formatter, and the error continues. We have also Try to spend printheads, inks, and Formatter PCA to the 24" and the same error.

To iterate to any test in the test menu, all they stand in the starting Nvm and not just any.

We do not know if you can be the piece or another problem ?. Could you guide us ....

a greeting

 

* One day I got on the panel see this error code

0x14040001

Send id.0x101021a

file: bushorsburhimpact.cpp

line: 1209

class: electronics

subclass: printmech board

error: the sun EIO

defin

DRACO_EX_PRINTMECH_BOARD_DEL SOLO_EIO

Delsoluctrspadig

the only thing I've found this error is referred to this.

0x14040001

Eridani not responding DRACO_EX_PRINTMECH_BOARD_ERIDANI_EIO 01.1 10

Electronics PrintMech Replace module.

STRING_POWER_OFF Restart the printer.

If the problem Persists, call HP support.

STRING_FAULTY_PART The printer has detected a possible faulty part.

* In theory CHANGING THE CUTTER PRINTMECH 2nd ERROR AND NOTHING TO LIKE THE PCA AND FORMATTER.

HAVE YOU COULD GO HARD DRIVE SOMETHING? ...........