• ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
  • ×
    Information
    Need Windows 11 help?
    Check documents on compatibility, FAQs, upgrade information and available fixes.
    Windows 11 Support Center.
Guidelines
We have new content about printers, Click here to check it out!
SofiaML
‎05-23-2023 12:34 PM
Views : 9,936
50% helpful (1/2)

Error updating Firmware on Laserjet models (Error 49)

 

Hi community!

 

Recently we had some cases related to failures in the Firmware update (error 49) mainly in Laserjet printer models. The following content may help you to solve the problem.

 

Perform Partial Reset. Access the support menu, follow the steps below:

 

  • Turn off the printer.
  • Wait 10 seconds before turning it back on.
  • Once the printer starts to power up, press the Back button (arrow icon) on the printer's front panel "four times".
  • If you did it correctly, the support menu should appear.

 

  • Accessing the Reboot Menu:

 

NOTE: The partial reset basically just refreshes the printer and clears unnecessary printer memory. This type resets, fixes minor printing issues like slow printing, cartridge errors, etc.

 

Update the Firmware

 

Go to the HP website on your Windows computer to check for and install the latest Printer Firmware Update.

 

      1. Make sure the printer is turned on and connected to your computer.

      2. Go to Download HP Software and Drivers and enter your printer model.

      3. Select Firmware from the list of drivers, click Download next to the update and follow the instructions.


NOTE: If you do not have a Firmware option, Firmware updates are not available for your printer.

 

        4. On the HP Printer Update screen, check the status of the printer.
       

  •  If your network printer is not displayed, use a USB cable to temporarily connect your printer to your computer. Wait 20 seconds and click Update.
  •  If the status is Ready, select the checkbox next to the serial number and click Update.


CAUTION: Do not turn off the printer during a Firmware Update. This can permanently damage your printer.

 

  • If the status is Updated, the printer's Firmware is up to date.
  • If the printer still shows Error 49, turn it off and unplug the power cord. Wait 1 hour. Reconnect the power cord and turn on the printer.

 

If the error persists, connect a network cable to the printer and, if possible, leave it connected for at least 1 hour.

 

 

💡If you have any questions regarding this or any other topic, please click here to create a new post. 

 

 HP Support Community

Was this article helpful? Yes No
Contributors
Comments
‎06-13-2023 07:29 AM

Glad you posted it, I was browsing for hours looking for the solution to this problem,

‎07-24-2023 02:09 PM

@nobitanobi  That's great 😊 I'm glad to help you!

‎08-08-2023 10:13 AM

I can't get to the screen with arrows. Keeps recycling, never getting to a screen I can use.

 

Warning
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.