-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
-
×InformationNeed Windows 11 help?Check documents on compatibility, FAQs, upgrade information and available fixes.
Windows 11 Support Center.
- HP Community
- HP Support Community Knowledge Base
- Printers Knowledge Base
- Printers Knowledge Base
- HP DeskJet 2723e: Step-by-Step HP 67 / 67XL Ink Replacement
Replacing the ink cartridge in your HP DeskJet 2723e printer involves a series of steps to ensure optimal performance and print quality.
Here's a detailed guide to help you through the process:
1. Prepare the Printer
- Load Paper: Ensure that plain white paper is loaded into the input tray.
- Power On: Turn on the printer by pressing the power button.
2. Access the Ink Cartridges
- Open the Cartridge Access Door: Carefully open the ink cartridge access door. This will cause the ink carriage to move to the center, making the cartridges accessible.
- Wait: Allow the carriage to become idle and silent before proceeding.
3. Remove the Old Cartridge
- Release the Cartridge: Gently press down on the ink cartridge you want to replace to release it.
- Remove the Cartridge: Once released, pull the cartridge out of the slot.
- Recycle the Old Cartridge: Consider recycling the used cartridge by visiting HP's recycling website.
4. Install the New Cartridge
- Unpack the New Cartridge: Remove the new HP 67 or 67XL ink cartridge from its package. Avoid touching the copper-colored contacts or the ink nozzles.
- Remove Protective Tape: Holding the cartridge by its sides, remove the plastic tape using the pull tab, but do not touch the contacts or nozzles, as this can result in an ink system failure.
- Insert the Cartridge: Slide the cartridge into its slot at a slight upward angle, and then push it until it clicks into place.
- Repeat: If necessary, repeat this process for the other cartridge.
5. Complete the Installation
- Close the Cartridge Access Door: Securely close the ink cartridge access door.
- Alignment: If an Alignment Page prints, follow the instructions to scan and complete the alignment. This ensures optimal print quality.
Once all the steps are completed, your HP DeskJet 2723e printer should be ready to use with the newly installed ink cartridges.
Sources: HP DeskJet 2700, 4100, 4800 printers - Replacing ink cartridges
Need help or have any questions? Start a new discussion here and get the answers you need.
Be alert for scammers posting fake support phone numbers and/or email addresses on the community.
If you think you have received a fake HP Support message, please report it to us by clicking on "Flag Post".
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.
† The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the <a href="https://www8.hp.com/us/en/terms-of-use.html" class="udrlinesmall">Terms of Use</a> and <a href="/t5/custom/page/page-id/hp.rulespage" class="udrlinesmall"> Rules of Participation</a>.