HP officejet pro 8720 - freezing/white screen.

[mikeM2005]

HP officejet pro 8720 - recently keeps freezing to a white screen/goes offline - multiple times a day.

Have to restart by power cycling.

I looked on this forum and have done a full power cycle and checked firmware is up to date.. still problem persistes

any advice how to fix this. 

thanks

Mike

[Jay_G24]

 Hi @mikeM2005,

I'd like to help with the printer connectivity issue.

 Use HP Print and Scan Doctor to check connectivity

Download a special version of HP Print and Scan Doctor specifically created to help with printer offline conditions.

1. Download HP Print and Scan Doctor.
2. Run HPPSdr.exe from the download location on your computer.
3. Once HP Print and Scan Doctor opens, click Start, and then select your printer.
   • If your printer in not in the list, turn it off and on, and then click Retry.
   • If there is a connection problem, follow the instructions in HP Print and Scan Doctor.
4. If a screen prompts you to turn on printer updates, click Yes.
5. If a screen prompts you to make your printer the default printer, click Yes.

Set a manual IP-

To set a manual IP and try the steps below -

--->Touch on the wifi icon ((i)) on the printer, and take down the IP address 

--->Open a web browser (ex Chrome or Mozilla) and type in the printer's IP

--->then go to network ---> general ---> network protocols ---> select IPV4 only-->apply 

--->go to wireless ---> wireless 802.11---> select manual ip ---> apply

--->Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS.  

--->then go to settings on the main ews page --> power management ---> select sleep mode to max 15min

 Connect the printer to TCP/IP port

 --->Touch on the wifi icon ((i)) on the printer, and take down the IP address 

a. Click Start/Devices and Printers.  Right-click on your HP Printer.  Select Printer Properties.  Select the Ports tab at the top.

b.    Select Add Port.  Select Standard TCP/IP Port.  Select New Port.

c.    Follow the Add Port Wizard.  Under Printer Name or IP Address, .  Example:  192.168.1.15.  The IP address will be copied under Port Name.  

d.    Select Next and Finish the Wizard.

Hope this helps! Keep me posted. 

And, Welcome to the HP Support Community. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping 

[markles]

I have a Mac, so your "HP Print and Scan Doctor" application doesn't work.

I have the exact same problem: freezing white-out window and unresponsive HP OfficeJet Pro 8720.  I have to restart it, but it does it again several times a day.

Please advise.

[Jay_G24]

Hi @markles,

I'd like to help!

 May I have the exact model name of the product? Refer to this document for steps to find the product details. Do not share any of your personal information such as serial, phone number, email ID, etc.

Keep me posted. 

And, Welcome to the HP Support Community. 

Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping

[markles]

HP OfficeJet Pro 8720

[Jay_G24]

Let's try a power reset on the printer

Reset the product

• With the printer turned on, disconnect the power cord from the rear of the printer.
• Unplug the power cord from the wall outlet.
• Wait at least 60 seconds.
• Plug the power cord back into the wall outlet.
• Reconnect the power cord to the printer.
• Turn the printer on. HP recommends plugging the printer directly into a wall outlet.

 Also, try updating the printer's firmware - HP Printers - Updating or Upgrading Printer Firmware

Hope this helps! Keep me posted. 

[markles]

Thank you for the suggestion.  I did as you directed, but the problem recurred about 12 hours later.

[Jay_G24 · Accepted solution]

We can perform a factory defaults on the printer to resolve the issue

• The reset instructions are specific for your printer and performing those steps on a different printer may corrupt the device.
• I've sent you a private message with reset instructions, follow the reset instruction to perform a full reset and re-initialize the printer.
• In order to access your private messages, click the private message icon on the upper right corner of your HP Support Community profile, next to your profile Name or simply click on this link: https://h30434.www3.hp.com/t5/notes/privatenotespage

Hope this helps! Keep me posted. 

[creadle]

My solution was:

Press several times on (invisible) back-arrow to reach hidden support menu, select resets and perform semi-full reset.